Comparison Honda Civic IX 1.8 i-VTEC (142Hp) Automatic & Ford Focus III Sedan 1.6 EcoBoost (182 Hp) start/stop
Add car |
Remove car |
Remove car |
| Brand: | Honda | Ford |
| Model: | Civic | Focus |
| Generation: | Civic IX | Focus III Sedan |
| Engine / modification: | 1.8 i-VTEC (142Hp) Automatic | 1.6 EcoBoost (182 Hp) start/stop |
| Production start: | 2012 year | 2010 year |
| Production end: | 2014 year | 2014 year |
| Coupe type: | Hatchback | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 8.7 l/100 km | 7.6 l/100 km |
| Fuel consumption / economy - extra urban: | 5.0 l/100 km | 4.9 l/100 km |
| Fuel consumption / economy - combined: | 6.4 l/100 km | 5.9 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | |
| Emission standard: | EURO V | |
| Power: | 142 hp | 182 hp |
| Max power in: | 6500 rpm. | |
| Maximum speed: | 210 km/h | 224 km/h |
| Acceleration from 0 to 100 km/h: | 11.2 sec | 8.0 sec |
| Torque: | 174 Nm/4300 rpm. | |
| Model Engine: | JTDA, JTDB | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1798 cm3 | |
| Engine oil capacity: | 4.05 l | |
| Coolant: | 5.5 l | |
| Fuel System: | Multi-point injection | Direct injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10.6 | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 5 | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4300 mm | |
| Width: | 1770 mm | |
| Height: | 1440 mm | |
| Wheelbase: | 2595 mm | |
| Minimum volume of Luggage (trunk): | 467 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1378 kg | |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.08 m |