Comparison Volvo V50 II 2.4i (170 Hp) MT & Volvo V60 I 2.4 D5 (215 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Volvo | Volvo |
| Model: | V50 | V60 |
| Generation: | V50 II | V60 I |
| Engine / modification: | 2.4i (170 Hp) MT | 2.4 D5 (215 Hp) Automatic |
| Production start: | 2004 year | 2010 year |
| Production end: | 2009 year | 2015 year |
| Coupe type: | Combi | Combi |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 12.4 l/100 km | 8.5 l/100 km |
| Fuel consumption / economy - extra urban: | 6.6 l/100 km | 4.9 l/100 km |
| Fuel consumption / economy - combined: | 8.5 l/100 km | 6.2 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 62 l | 67.5 l |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 162 g/km | |
| Power: | 170 hp | 215 hp |
| Max power in: | 6000 rpm. | 4000 rpm. |
| Acceleration from 0 to 100 km/h: | 8.3 sec | 7.7 sec |
| Torque: | 230 Nm/4400 rpm. | 440 Nm @ 1500-3000 rpm. |
| Model Engine: | D5244T15 | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 2435 cm3 | 2400 cm3 |
| Engine oil capacity: | 5.9 l | |
| Coolant: | 8.9 l | |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 5 | 5 |
| Piston Stroke: | 83 mm | 93.15 mm |
| Cylinder Bore: | 81 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4522 mm | 4628 mm |
| Width: | 1845 mm | 1865 mm |
| Height: | 1457 mm | 1484 mm |
| Wheelbase: | 2640 mm | 2776 mm |
| Front track: | 1535 mm | 1588 mm |
| Rear (Back) track: | 1531 mm | 1585 mm |
| Minimum volume of Luggage (trunk): | 417 l | 692 l |
| Max weight: | 1960 kg | 2200 kg |
| Kerb Weight: | 1483 kg | 1631 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.1 m | 11.5 m |