Comparison Isuzu Bighorn (SUV) 2.8 DT (115 Hp) & Mercedes-Benz CLK (A 208 facelift 1999) CLK 230 (197 Hp) Kompressor
Add car |
Remove car |
Remove car |
| Brand: | Isuzu | Mercedes-Benz |
| Model: | Bighorn | CLK |
| Generation: | Bighorn (SUV) | CLK (A 208 facelift 1999) |
| Engine / modification: | 2.8 DT (115 Hp) | CLK 230 (197 Hp) Kompressor |
| Production start: | 1987 year | 2000 year |
| Production end: | 1991 year | 2003 year |
| Coupe type: | Off-road vehicle | Cabriolet |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 13.8 l/100 km | |
| Fuel consumption / economy - extra urban: | 7.2 l/100 km | |
| Fuel consumption / economy - combined: | 9.6 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 83 l | 62 l |
| Power: | 115 hp | 197 hp |
| Max power in: | 3600 rpm. | 5500 rpm. |
| Maximum speed: | 230 km/h | |
| Acceleration from 0 to 100 km/h: | 8.7 sec | |
| Torque: | 235 Nm @ 2300 rpm. | 280 Nm/2500-4800 rpm. |
| Model Engine: | 4JB1-T | |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 2771 cm3 | 2295 cm3 |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbocharging | Mechanical supercharging (Compressor) |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 17 | |
| Piston Stroke: | 102 mm | |
| Cylinder Bore: | 93 mm | |
| Wheel Drive: | All wheel drive (4x4) | Rear wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | 6 |
| Length: | 4470 mm | 4567 mm |
| Width: | 1760 mm | 1722 mm |
| Height: | 1845 mm | 1380 mm |
| Wheelbase: | 2650 mm | |
| Front track: | 1450 mm | |
| Rear (Back) track: | 1460 mm | |
| Max weight: | 2050 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 1700 kg | 1645 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.8 m | 10.70 m |
| Permitted trailer load with brakes (12%): | 1500 kg | |
| Permitted trailer load without brakes: | 750 kg |