Comparison Aston Martin DB4 3.7 (243 Hp) & Mazda 3 TAKUMI 1.6 i (116 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Aston Martin | Mazda |
| Model: | DB4 | 3 |
| Generation: | DB4 | 3 TAKUMI |
| Engine / modification: | 3.7 (243 Hp) | 1.6 i (116 Hp) |
| Production start: | 1958 year | |
| Production end: | 1963 year | |
| Coupe type: | Sedan | Hatchback |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - urban: | 8.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.2 l/100 km | |
| Fuel consumption / economy - combined: | 6.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | |
| Emission standard: | EURO V | |
| Power: | 243 hp | 116 hp |
| Max power in: | 5000 rpm. | 6000 rpm. |
| Maximum speed: | 225 km/h | 185 km/h |
| Acceleration from 0 to 100 km/h: | 12.2 sec | |
| Torque: | 325 Nm/4200 rpm. | 145 Nm/4000 rpm. |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 3670 cm3 | 1598 cm3 |
| Fuel System: | Carburettor | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 8.25 | |
| Piston Stroke: | 92 mm | |
| Cylinder Bore: | 92 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 4 | 5 |
| Length: | 4480 mm | 4460 mm |
| Width: | 1676 mm | 1755 mm |
| Height: | 1321 mm | 1470 mm |
| Wheelbase: | 2490 mm | 2640 mm |
| Front track: | 1372 mm | |
| Rear (Back) track: | 1360 mm | |
| Ride height(clearance): | 177 mm | |
| Minimum volume of Luggage (trunk): | 340 l | |
| Maximum amount of Luggage (trunk): | 1360 l | |
| Front suspension: | Double wishbone | |
| Rear suspension: | dependent spring suspension | |
| Max weight: | 1770 kg | |
| Front brakes: | Disc | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1308 kg | 1259 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10.3 m |