Comparison Renault Master III (Phase II, 2014) Crew Van 2.3 dCi (125 Hp) L2H2 Automatic & Mazda Protege Wagon 1.5 i (110 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Renault | Mazda |
| Model: | Master | Protege |
| Generation: | Master III (Phase II, 2014) Crew Van | Protege Wagon |
| Engine / modification: | 2.3 dCi (125 Hp) L2H2 Automatic | 1.5 i (110 Hp) |
| Production start: | 2014 year | 1994 year |
| Production end: | 2017 year | 1998 year |
| Coupe type: | Combi | |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 7 | 5 |
| Fuel consumption / economy - urban: | 8.1-8.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 7.0-7.6 l/100 km | |
| Fuel consumption / economy - combined: | 7.4-7.9 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 105 l | 50 l |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 194-206 g/km | |
| Power: | 125 hp | 110 hp |
| Max power in: | 3500 rpm. | 6000 rpm. |
| Torque: | 310 Nm @ 1500 rpm. | 137 Nm @ 4000 rpm. |
| Model Engine: | M9T | ZL-DE |
| Engine position: | Front, transverse | |
| Engine displacement: | 2298 cm3 | 1489 cm3 |
| Engine oil capacity: | 8 l | |
| Coolant: | 11 l | |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbocharger | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9 | |
| Piston Stroke: | 83.6 mm | |
| Cylinder Bore: | 75.3 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Length: | 5548 mm | 4175 mm |
| Width: | 2070 mm | 1665 mm |
| Width including mirrors: | 2470 mm | |
| Height: | 2502 mm | 1480 mm |
| Wheelbase: | 3682 mm | 2400 mm |
| Front track: | 1750 mm | |
| Rear (Back) track: | 1730 mm | |
| Ride height(clearance): | 174 mm | |
| Front overhang: | 842 mm | |
| Rear overhang: | 1024 mm | |
| Maximum amount of Luggage (trunk): | 6900 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | The spring | |
| Max weight: | 3500 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1010 kg | |
| Minimum turning circle (turning diameter): | 9 m | |
| Tire size: | 225/65 R16 | |
| Wheel rims size: | R16 |