Comparison Opel Kadett C Coupe 1.2 (52 Hp) & Ford C-MAX II 1.6 Duratorq TDCi (115 Hp) DPF
Add car |
Remove car |
Remove car |
| Brand: | Opel | Ford |
| Model: | Kadett | C-MAX |
| Generation: | Kadett C Coupe | C-MAX II |
| Engine / modification: | 1.2 (52 Hp) | 1.6 Duratorq TDCi (115 Hp) DPF |
| Production start: | 1973 year | 2010 year |
| Production end: | 1977 year | |
| Coupe type: | Coupe | MPV |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 5.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.0 l/100 km | |
| Fuel consumption / economy - combined: | 4.5 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 43 l | 55 l |
| Emission standard: | EURO V | |
| CO2 emissions: | 117 g/km | |
| Power: | 52 hp | 115 hp |
| Max power in: | 5600 rpm. | |
| Maximum speed: | 136 km/h | 184 km/h |
| Acceleration from 0 to 100 km/h: | 21 sec | 11.3 sec |
| Torque: | 79 Nm @ 3400 rpm. | 270 Nm |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1196 cm3 | |
| Fuel System: | Carburettor | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHV | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 7.8 | |
| Piston Stroke: | 61 mm | |
| Cylinder Bore: | 79 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 4 | 6 |
| Length: | 4127 mm | 4380 mm |
| Width: | 1580 mm | 1828 mm |
| Height: | 1340 mm | 1626 mm |
| Wheelbase: | 2395 mm | |
| Front track: | 1300 mm | |
| Rear (Back) track: | 1301 mm | |
| Ride height(clearance): | 140 mm | |
| Minimum volume of Luggage (trunk): | 432 l | |
| Maximum amount of Luggage (trunk): | 1684 l | |
| Max weight: | 1170 kg | 1915 kg |
| Front brakes: | Disc | |
| Rear brakes: | Drum | |
| Kerb Weight: | 805 kg | 1390 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 9.2 m | 10.7 m |