Comparison Ford Scorpio I Hatch (GGE) 2.9 i 4x4 (145 Hp) & Honda S800 0.8 (70 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Ford | Honda |
| Model: | Scorpio | S800 |
| Generation: | Scorpio I Hatch (GGE) | S800 |
| Engine / modification: | 2.9 i 4x4 (145 Hp) | 0.8 (70 Hp) |
| Production start: | 1989 year | 1966 year |
| Production end: | 1992 year | 1970 year |
| Coupe type: | Hatchback | Coupe |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 5 | 3 |
| Num. of seats: | 5 | 2 |
| Fuel consumption / economy - combined: | 9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | 30 l |
| Power: | 145 hp | 70 hp |
| Max power in: | 5500 rpm. | 8500 rpm. |
| Maximum speed: | 160 km/h | |
| Acceleration from 0 to 100 km/h: | 12.5 sec | |
| Torque: | 229 Nm @ 3000 rpm. | 66 Nm @ 6000 rpm. |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 2933 cm3 | 791 cm3 |
| Engine oil capacity: | 3.7 l | |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | V engine | |
| Valvetrain: | OHC | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 9.2 | |
| Piston Stroke: | 72 mm | 70 mm |
| Cylinder Bore: | 93 mm | 60 mm |
| Wheel Drive: | All wheel drive (4x4) | Rear wheel drive |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4669 mm | 3335 mm |
| Width: | 1760 mm | 1400 mm |
| Height: | 1490 mm | 1215 mm |
| Wheelbase: | 2761 mm | 2000 mm |
| Ride height(clearance): | 160 mm | |
| Front suspension: | Independent torsion bar, double wishbone | |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 755 kg | |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 10.4 m | 8.8 m |