Car technical specifications and fuel economy / consumption / mpg

Comparison Audi 80 III (B2, Typ 81,85) 1.6 TD (70 Hp) Automatic & Dodge Challenger III SRT8 6.4 HEMI V8 (470 Hp) Automatic


Add car
Audi 80 III (B2, Typ 81,85) 1.6 TD (70 Hp) Automatic
Remove car
Dodge Challenger III SRT8 6.4 HEMI V8 (470 Hp) Automatic
Remove car
Brand: Audi Dodge
Model: 80 Challenger
Generation: 80 III (B2, Typ 81,85) Challenger III
Engine / modification: 1.6 TD (70 Hp) Automatic SRT8 6.4 HEMI V8 (470 Hp) Automatic
Production start: 1982 year 2011 year
Production end: 1984 year 2014 year
Coupe type: Sedan Coupe
Powertrain Architecture: Internal Combustion engine
Num. of Doors: 2/4 2
Num. of seats: 5 5
Fuel consumption / economy - urban: 16.8 l/100 km
Fuel consumption / economy - extra urban: 10.2 l/100 km
Fuel consumption / economy - combined: 7.5 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Drag coefficient: 0.40 0.356
Fuel tank volume: 68 l 71.9 l
Power: 70 hp 470 hp
Max power in: 4500 rpm. 6000 rpm.
Maximum speed: 154 km/h
Acceleration from 0 to 100 km/h: 16.3 sec
Torque: 130 Nm/2600 rpm. 637 Nm @ 4200 rpm.
Engine position: Front, longitudinal
Engine displacement: 1588 cm3 6417 cm3
Engine oil capacity: 6.6 l
Coolant: 13.25 l
Fuel System: Diesel - Standard diesel injection (SDI) Multi-point indirect injection
Maximum engine speed: 6400 rpm.
Aspiration / Turbine: Turbocharging Naturally aspirated engine
Position of cylinders: Inline V engine
Valvetrain: OHV
Number of cylinders: 4 8
Number of valves per cylinder: 2 2
Compression ratio: 23.5 10.9
Piston Stroke: 80 mm 94.5 mm
Cylinder Bore: 79.5 mm 103.9 mm
Wheel Drive: Front wheel drive Rear wheel drive
Number of Gears (automatic transmission): 3 5
Length: 4383 mm 5023 mm
Width: 1682 mm 1923 mm
Height: 1365 mm 1449 mm
Wheelbase: 2541 mm 2946 mm
Front track: 1400 mm 1603 mm
Rear (Back) track: 1420 mm 1604 mm
Ride height(clearance): 122 mm
Minimum volume of Luggage (trunk): 505 l
Max weight: 1480 kg
Kerb Weight: 1045 kg 1887 kg
Steering type: Steering rack and pinion Steering rack and pinion
Power steering: Hydraulic Steering
Minimum turning circle (turning diameter): 10.4 m 11.48 m
Tire size: 245/45 R20; 255/45 R20
Wheel rims size: 9J x 20