Comparison Toyota Belta 1.3 (86 Hp) & Renault Master III (Phase II, 2014) Panel Van 2.3 dCi (170 Hp) L1H1 SL28 Automatic
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Renault |
| Model: | Belta | Master |
| Generation: | Belta | Master III (Phase II, 2014) Panel Van |
| Engine / modification: | 1.3 (86 Hp) | 2.3 dCi (170 Hp) L1H1 SL28 Automatic |
| Production start: | 2005 year | 2017 year |
| Production end: | 2012 year | 2018 year |
| Coupe type: | Sedan | |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 3 |
| Fuel consumption / economy - urban: | 7.8-7.9 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.9-7.0 l/100 km | |
| Fuel consumption / economy - combined: | 7.2-7.3 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 42 l | 105 l |
| Emission standard: | Euro 6 | |
| CO2 emissions: | 187 - 189 g/km | |
| Power: | 86 hp | 170 hp |
| Max power in: | 6000 rpm. | 3500 rpm. |
| Acceleration from 0 to 100 km/h: | 13 sec | |
| Torque: | 124 Nm @ 4400 rpm. | 380 Nm @ 1500 rpm. |
| Model Engine: | 2SZ-FE, 2NZ-FE | M9T |
| Engine position: | Front, transverse | |
| Engine displacement: | 1299 cm3 | 2298 cm3 |
| Engine oil capacity: | 3.2-3.7 l | 8 l |
| Coolant: | 4.8-5.4 l | 11 l |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Twin-Turbo | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 73.5 mm | 101.5 mm |
| Cylinder Bore: | 75 mm | 85 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | 6 |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4300 mm | 5048 mm |
| Width: | 1895 mm | 2070 mm |
| Width including mirrors: | 2470 mm | |
| Height: | 1460 mm | 2310 mm |
| Wheelbase: | 2550 mm | 3182 mm |
| Front track: | 1750 mm | |
| Rear (Back) track: | 1730 mm | |
| Ride height(clearance): | 182 mm | |
| Front overhang: | 842 mm | |
| Rear overhang: | 1024 mm | |
| Maximum amount of Luggage (trunk): | 8000 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | The spring | |
| Max weight: | 2800 kg | |
| Kerb Weight: | 1852 kg | |
| Minimum turning circle (turning diameter): | 12.5 m | |
| Permitted trailer load with brakes (12%): | 2500 kg | |
| Permitted trailer load without brakes: | 750 kg | |
| Tire size: | 225/65 R16 | |
| Wheel rims size: | R16 |