Comparison Holden Rodeo 3.0 TDi 2WD (130 Hp) & Peugeot 5008 I (Phase II, 2013) 1.6 VTi (120 Hp) 7 Seat
Add car |
Remove car |
Remove car |
| Brand: | Holden | Peugeot |
| Model: | Rodeo | 5008 |
| Generation: | Rodeo | 5008 I (Phase II, 2013) |
| Engine / modification: | 3.0 TDi 2WD (130 Hp) | 1.6 VTi (120 Hp) 7 Seat |
| Production start: | 1988 year | 2013 year |
| Production end: | 2003 year | 2015 year |
| Coupe type: | Pick-up | MPV |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 2 | 7 |
| Fuel consumption / economy - urban: | 9.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.5 l/100 km | |
| Fuel consumption / economy - combined: | 6.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 60 l | |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 159 g/km | |
| Power: | 130 hp | 120 hp |
| Max power in: | 6000 rpm. | |
| Maximum speed: | 187 km/h | |
| Acceleration from 0 to 100 km/h: | 12.3 sec | |
| Torque: | 160 Nm @ 4250 rpm. | |
| Engine displacement: | 1598 cm3 | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 4529 mm | |
| Width with mirrors folded: | 1888 mm | |
| Width including mirrors: | 2118 mm | |
| Height: | 1622 mm | |
| Wheelbase: | 2727 mm | |
| Front overhang: | 934 mm | |
| Rear overhang: | 868 mm | |
| Minimum volume of Luggage (trunk): | 194 l | |
| Maximum amount of Luggage (trunk): | 1754 l | |
| Front suspension: | Independent type McPherson | |
| Rear suspension: | Semi-independent, spring | |
| Max weight: | 2190 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1430 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.1 m | |
| Permitted trailer load with brakes (12%): | 1400 kg | |
| Tire size: | 215/55 R16 | |
| Wheel rims size: | R16 |