Comparison Subaru Outback I 2.5i 4WD (165 Hp) & Mitsubishi L200 (2010) 2.5 DI-D (136 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Subaru | Mitsubishi |
| Model: | Outback | L200 |
| Generation: | Outback I | L200 (2010) |
| Engine / modification: | 2.5i 4WD (165 Hp) | 2.5 DI-D (136 Hp) |
| Production start: | 1995 year | 2010 year |
| Production end: | 1999 year | 2015 year |
| Coupe type: | Combi | Pick-up |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 14 l/100 km | 8.9 l/100 km |
| Fuel consumption / economy - extra urban: | 9 l/100 km | 6.8 l/100 km |
| Fuel consumption / economy - combined: | 11 l/100 km | 7.5 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 60 l | 75 l |
| Emission standard: | EURO 1 | EURO V |
| Power: | 165 hp | 136 hp |
| Max power in: | 5600 rpm. | 4000 rpm. |
| Maximum speed: | 167 km/h | |
| Acceleration from 0 to 100 km/h: | 14.0 sec | |
| Torque: | 226 Nm/4400 rpm. | 314 Nm @ 2000 rpm. |
| Engine position: | Front, longitudinal | Front, longitudinal |
| Engine displacement: | 2457 cm3 | 2477 cm3 |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbocharger / Intercooler | |
| Position of cylinders: | Boxer | |
| Valvetrain: | OHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10 | |
| Piston Stroke: | 79 mm | |
| Cylinder Bore: | 99.5 mm | |
| Wheel Drive: | All wheel drive (4x4) | All wheel drive (4x4) |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 4719 mm | 5185 mm |
| Width: | 1715 mm | 1750 mm |
| Height: | 1600 mm | 1775 mm |
| Wheelbase: | 2629 mm | 3000 mm |
| Front suspension: | Independent torsion bar, double wishbone | |
| Rear suspension: | Elastic beam | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1480 kg | 1870 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.8 m |