Comparison Renault Laguna III (Phase II) 1.5 dCi (110 Hp) & Ford Shelby I Cabrio Cobra GT 350 5.0 V8 (254 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Renault | Ford |
| Model: | Laguna | Shelby |
| Generation: | Laguna III (Phase II) | Shelby I Cabrio |
| Engine / modification: | 1.5 dCi (110 Hp) | Cobra GT 350 5.0 V8 (254 Hp) |
| Production start: | 2010 year | 1968 year |
| Production end: | 1970 year | |
| Coupe type: | Hatchback | Cabriolet |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 4.9 l/100 km | |
| Fuel consumption / economy - extra urban: | 3.7 l/100 km | |
| Fuel consumption / economy - combined: | 4.2 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 66 l | 64 l |
| Emission standard: | EURO V | |
| CO2 emissions: | 109 g/km | |
| Power: | 110 hp | 254 hp |
| Max power in: | 4000 rpm. | 4800 rpm. |
| Maximum speed: | 193 km/h | |
| Acceleration from 0 to 100 km/h: | 11.9 sec | |
| Torque: | 240 Nm/1750 rpm. | 420 Nm @ 2800 rpm. |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1461 cm3 | 4942 cm3 |
| Fuel System: | Diesel - Standard diesel injection (SDI) | Carburettor |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | V engine |
| Number of cylinders: | 4 | 8 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 10.5 | |
| Piston Stroke: | 76.2 mm | |
| Cylinder Bore: | 101.6 mm | |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (manual transmission): | 6 | 4 |
| Length: | 4695 mm | 4740 mm |
| Width: | 1811 mm | 1801 mm |
| Height: | 1445 mm | 1306 mm |
| Wheelbase: | 2756 mm | 2743 mm |
| Front track: | 1557 mm | 1476 mm |
| Rear (Back) track: | 1512 mm | 1476 mm |
| Max weight: | 1936 kg | |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1310 kg | 1511 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.6 m |