Comparison Maybach 57 S (W240, facelift 2010) 6.0 V12 (630 Hp) Automatic & Zenvo TSR-S 5.8 V8 (1177 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Maybach | Zenvo |
| Model: | 57 S | TSR-S |
| Generation: | 57 S (W240, facelift 2010) | TSR-S |
| Engine / modification: | 6.0 V12 (630 Hp) Automatic | 5.8 V8 (1177 Hp) Automatic |
| Production start: | 2010 year | 2018 year |
| Production end: | 2013 year | |
| Coupe type: | Sedan | Coupe |
| Num. of Doors: | 4 | 2 |
| Num. of seats: | 4 | 2 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 110 l | |
| Emission standard: | Euro 5 | |
| Power: | 630 hp | 1177 hp |
| Max power in: | 4800-5100 rpm. | 8500 rpm. |
| Maximum speed: | 275 , Electronically limited km/h | 325 km/h |
| Acceleration from 0 to 100 km/h: | 4.9 sec | 2.8 sec |
| Acceleration from 0 to 200 km/h: | 6.8 sec | |
| Torque: | 1000 Nm @ 2000-4000 rpm. | |
| Model Engine: | M 285.980 | |
| Engine position: | Front, longitudinal | Middle, longitudinal |
| Engine displacement: | 5980 cm3 | 5800 cm3 |
| Engine oil capacity: | 10 l | |
| Coolant: | 15.1 l | |
| Fuel System: | Multi-point injection | |
| Aspiration / Turbine: | Mechanical supercharging (Compressor) | |
| Position of cylinders: | V engine | |
| Valvetrain: | SOHC | |
| Number of cylinders: | 12 | 8 |
| Number of valves per cylinder: | 3 | 4 |
| Compression ratio: | 9 | |
| Piston Stroke: | 93 mm | |
| Cylinder Bore: | 82.6 mm | |
| Wheel Drive: | Rear wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 5 | 7 |
| Length: | 5734 mm | 4815 mm |
| Width: | 1980 mm | 2038 mm |
| Height: | 1557 mm | 1198 mm |
| Wheelbase: | 3390 mm | 2906 mm |
| Front track: | 1675 mm | |
| Rear (Back) track: | 1695 mm | |
| Ride height(clearance): | 145 mm | |
| Minimum volume of Luggage (trunk): | 605 l | |
| Max weight: | 3260 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Ventilated discs | Ventilated discs |
| Kerb Weight: | 2660 kg | 1495 kg |
| ABS: | yes | |
| Steering type: | Cone worm with recirculation balls | Steering rack and pinion |
| Power steering: | Hydraulic Steering | |
| Minimum turning circle (turning diameter): | 13.4 m | |
| Tire size: | 275/45 R20 | 245/35 R20; 325/30 R21 |
| Wheel rims size: | 8.5J x 20 | 8.5J x 20; 12.5J x 21 |