Comparison Skoda Octavia III (facelift 2017) 1.4 G-TEC (110 Hp) CNG DSG
Add car |
Remove car |
| Brand: | Skoda |
| Model: | Octavia |
| Generation: | Octavia III (facelift 2017) |
| Engine / modification: | 1.4 G-TEC (110 Hp) CNG DSG |
| Production start: | 2017 year |
| Production end: | 2018 year |
| Coupe type: | Hatchback |
| Num. of Doors: | 5 |
| Num. of seats: | 5 |
| Fuel consumption / economy - urban: | 6.7 l/100 km |
| Fuel consumption / economy - extra urban: | 4.8 l/100 km |
| Fuel consumption / economy - combined: | 5.5 l/100 km |
| Fuel consumption / economy, urban - CNG: | 6.9 kg/100 km |
| Fuel consumption / economy, extra urban - CNG: | 4.7 kg/100 km |
| Fuel consumption / economy, combined - CNG: | 5.5 kg/100 km |
| Fuel Type: | Petrol / CNG |
| Fuel tank volume: | 50 l |
| Emission standard: | Euro 6 |
| CO2 emissions: | 125 g/km |
| CNG CO2 emissions: | 98 g/km |
| Power: | 110 hp |
| Maximum speed: | 195 km/h |
| Acceleration from 0 to 100 km/h: | 11.0 sec |
| Torque: | 200 Nm @ 1500-3500 rpm. |
| Model Engine: | CPWA |
| Engine position: | Front, transverse |
| Engine displacement: | 1395 cm3 |
| Engine oil capacity: | 4 l |
| Fuel System: | Direct injection |
| CNG cylinder capacity: | 15 kg |
| Aspiration / Turbine: | Turbocharging |
| Position of cylinders: | Inline |
| Number of cylinders: | 4 |
| Number of valves per cylinder: | 4 |
| Compression ratio: | 10.5 |
| Piston Stroke: | 80 mm |
| Cylinder Bore: | 74.5 mm |
| Wheel Drive: | Front wheel drive |
| Number of Gears (automatic transmission): | 7 DSG |
| Length: | 4670 mm |
| Width: | 1814 mm |
| Height: | 1458 mm |
| Wheelbase: | 2680 mm |
| Front track: | 1543 mm |
| Rear (Back) track: | 1549 mm |
| Minimum volume of Luggage (trunk): | 590 l |
| Maximum amount of Luggage (trunk): | 1580 l |
| Max weight: | 1892 kg |
| Front brakes: | Ventilated discs |
| Rear brakes: | Disc |
| Kerb Weight: | 1344 kg |
| ABS: | yes |
| Steering type: | Steering rack and pinion |
| Power steering: | Electric Steering |
| Max. roof load: | 75 kg |
| Minimum turning circle (turning diameter): | 10.59 m |