Car technical specifications and fuel economy / consumption / mpg

Comparison Lancia Fulvia 1.3 S (88 Hp) & Volkswagen CrossPolo V 1.2 TSI (110 Hp) DSG & Audi 80 V Avant (B4, Typ 8C) 1.6 E (101 Hp) Automatic


Add car
Lancia Fulvia 1.3 S (88 Hp)
Remove car
Volkswagen CrossPolo V 1.2 TSI (110 Hp) DSG
Remove car
Audi 80 V Avant (B4, Typ 8C) 1.6 E (101 Hp) Automatic
Remove car
Brand: Lancia Volkswagen Audi
Model: Fulvia Polo 80
Generation: Fulvia CrossPolo V 80 V Avant (B4, Typ 8C)
Engine / modification: 1.3 S (88 Hp) 1.2 TSI (110 Hp) DSG 1.6 E (101 Hp) Automatic
Production start: 1968 year 2010 year 1993 year
Production end: 1975 year 2014 year 1995 year
Coupe type: Hatchback Combi
Num. of Doors: 5 5
Num. of seats: 5 5
Fuel consumption / economy - urban: 5.9 l/100 km
Fuel consumption / economy - extra urban: 4.3 l/100 km
Fuel consumption / economy - combined: 4.9 l/100 km
Fuel Type: Petrol (Gasoline) Petrol (Gasoline) Petrol (Gasoline)
Fuel tank volume: 45 l 66 l
Emission standard: Euro 5
CO2 emissions: 114 g/km
Power: 88 hp 110 hp 101 hp
Max power in: 5000 rpm. 5600 rpm.
Maximum speed: 190 km/h
Acceleration from 0 to 100 km/h: 9.8 sec
Torque: 175 Nm @ 1500-4000 rpm. 130 Nm/3200 rpm.
Model Engine: ABB
Engine position: Front, transverse Front, longitudinal
Engine displacement: 1197 cm3 1595 cm3
Fuel System: Direct injection Multi-point injection
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Valvetrain: SOHC
Number of cylinders: 4 4
Number of valves per cylinder: 2
Compression ratio: 10.3
Piston Stroke: 77.4 mm
Cylinder Bore: 81 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): 7 DSG 4
Length: 3987 mm 4482 mm
Width: 1698 mm 1695 mm
Height: 1488 mm 1408 mm
Wheelbase: 2469 mm 2612 mm
Front track: 1454 mm 1448 mm
Rear (Back) track: 1453 mm 1471 mm
Minimum volume of Luggage (trunk): 280 l 370 l
Maximum amount of Luggage (trunk): 952 l 650 l
Max weight: 1630 kg
Front brakes: Ventilated discs
Rear brakes: Disc
Kerb Weight: 1213 kg
ABS: yes yes
Steering type: Steering rack and pinion
Minimum turning circle (turning diameter): 10.6 m 11.2 m