Comparison Chevrolet Silverado I 4.3 (200 Hp) Crew Cab 1500 4WD & Opel Kadett D 1.0 (50 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Chevrolet | Opel |
| Model: | Silverado 1500 | Kadett |
| Generation: | Silverado I | Kadett D |
| Engine / modification: | 4.3 (200 Hp) Crew Cab 1500 4WD | 1.0 (50 Hp) |
| Production start: | 1998 year | 1979 year |
| Production end: | 2002 year | 1981 year |
| Coupe type: | Pick-up | Hatchback |
| Num. of Doors: | 5 | 3/5 |
| Num. of seats: | 4 | 5 |
| Fuel consumption / economy - urban: | 15.7 l/100 km | |
| Fuel consumption / economy - extra urban: | 11.7 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 42 l | |
| Power: | 200 hp | 50 hp |
| Max power in: | 4600 rpm. | 5800 rpm. |
| Maximum speed: | 137 km/h | |
| Acceleration from 0 to 100 km/h: | 19.5 sec | |
| Torque: | 352 Nm @ 2800 rpm. | 70 Nm @ 3400-3800 rpm. |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 4293 cm3 | 993 cm3 |
| Engine oil capacity: | 2.8 l | |
| Coolant: | 4.9 l | |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | - | OHV |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 9.1 | 8.8 |
| Piston Stroke: | 88.4 mm | 61 mm |
| Cylinder Bore: | 101.6 mm | 72 mm |
| Wheel Drive: | All wheel drive (4x4) | Front wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 5 | 4 |
| Length: | 6025 mm | 3998 mm |
| Width: | 1994 mm | 1636 mm |
| Height: | 1963 mm | 1380 mm |
| Wheelbase: | 3885 mm | 2514 mm |
| Front track: | 1899 mm | 1400 mm |
| Rear (Back) track: | 1676 mm | 1406 mm |
| Minimum volume of Luggage (trunk): | 490 l | |
| Maximum amount of Luggage (trunk): | 1360 l | |
| Front suspension: | Torsion | |
| Rear suspension: | The spring | |
| Max weight: | 1270 kg | |
| Front brakes: | Disc | |
| Rear brakes: | Drum | |
| Kerb Weight: | 815 kg | |
| Minimum turning circle (turning diameter): | 10.5 m |