Comparison Ford Bronco I 4.9 V8 (208 Hp) AWD & Opel Campo Single Cab 2.3 (94 Hp) 4x4
Add car |
Remove car |
Remove car |
| Brand: | Ford | Opel |
| Model: | Bronco | Campo |
| Generation: | Bronco I | Campo Single Cab |
| Engine / modification: | 4.9 V8 (208 Hp) AWD | 2.3 (94 Hp) 4x4 |
| Production start: | 1966 year | 1991 year |
| Production end: | 1977 year | 2000 year |
| Coupe type: | SUV | Pick-up |
| Num. of Doors: | 3 | 2 |
| Num. of seats: | 5 | 2 |
| Fuel consumption / economy - combined: | 19.6 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.65 | |
| Power: | 208 hp | 94 hp |
| Max power in: | 4600 rpm. | 5000 rpm. |
| Maximum speed: | 156 km/h | |
| Acceleration from 0 to 100 km/h: | 10.0 sec | |
| Torque: | 407 Nm @ 2600 rpm. | 170 Nm @ 2600 rpm. |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 4949 cm3 | 2255 cm3 |
| Fuel System: | Carburettor | |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 8 | 4 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 8.6 | |
| Piston Stroke: | 76.2 mm | 90 mm |
| Cylinder Bore: | 101.6 mm | 89.3 mm |
| Wheel Drive: | All wheel drive (4x4) | All wheel drive (4x4) |
| Number of Gears (manual transmission): | 3 | 5 |
| Length: | 3863 mm | 4980 mm |
| Width: | 1748 mm | 1690 mm |
| Height: | 1859 mm | 1595 mm |
| Wheelbase: | 2337 mm | 3025 mm |
| Front track: | 1453 mm | |
| Rear (Back) track: | 1453 mm | |
| Ride height(clearance): | 201 mm | |
| Front suspension: | Independent, spring | |
| Rear suspension: | dependent spring suspension | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 1560 kg | |
| Minimum turning circle (turning diameter): | 10.2 m | |
| Tire size: | 165/75 R16 | |
| Wheel rims size: | R16 |