Comparison Kia Sonet G1.0 T-GDi (120 Hp) & Nissan Cedric (Y31) 3.0i V6 (160 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Kia | Nissan |
| Model: | Sonet | Cedric |
| Generation: | Sonet | Cedric (Y31) |
| Engine / modification: | G1.0 T-GDi (120 Hp) | 3.0i V6 (160 Hp) Automatic |
| Production start: | 2020 year | 1987 year |
| Production end: | 1989 year | |
| Coupe type: | Sedan | |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 13.3-17.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.4-11 l/100 km | |
| Fuel consumption / economy - combined: | 11.8 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Drag coefficient: | 0.4 | |
| Fuel tank volume: | 45 l | 72 l |
| Emission standard: | BS VI | |
| Power: | 120 hp | 160 hp |
| Max power in: | 6000 rpm. | 5200 rpm. |
| Maximum speed: | 189 km/h | |
| Acceleration from 0 to 100 km/h: | 10.6 sec | |
| Torque: | 172 Nm @ 1500-4000 rpm. | 248 Nm/3200 rpm. |
| Engine position: | Front, longitudinal | |
| Engine displacement: | 998 cm3 | 2960 cm3 |
| Fuel System: | Direct injection | Multi-point injection |
| Position of cylinders: | Inline | V engine |
| Valvetrain: | SOHC | |
| Number of cylinders: | 3 | 6 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 9 | |
| Piston Stroke: | 83 mm | |
| Cylinder Bore: | 87 mm | |
| Wheel Drive: | Front wheel drive | Rear wheel drive |
| Number of Gears (automatic transmission): | 4 | |
| Number of Gears (manual transmission): | 6 iMT | |
| Length: | 3995 mm | 4690 mm |
| Width: | 1790 mm | 1720 mm |
| Height: | 1642 mm | 1425 mm |
| Wheelbase: | 2500 mm | 2735 mm |
| Front track: | 1440 mm | |
| Rear (Back) track: | 1450 mm | |
| Ride height(clearance): | 135 mm | |
| Minimum volume of Luggage (trunk): | 392 l | |
| Front suspension: | Independent type McPherson | |
| Rear suspension: | Torsion | |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 1490 kg | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11 m | |
| Tire size: | 215/60 R16 | 205/65 R15 |
| Wheel rims size: | R16 | R15 |