Comparison Mazda Capella 2.0 i (140 Hp) & Mazda 3 III Sedan (BM) 1.5i (100 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Mazda | Mazda |
| Model: | Capella | 3 |
| Generation: | Capella | 3 III Sedan (BM) |
| Engine / modification: | 2.0 i (140 Hp) | 1.5i (100 Hp) |
| Production start: | 1997 year | 2014 year |
| Production end: | 2002 year | |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 6.4 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.2 l/100 km | |
| Fuel consumption / economy - combined: | 5.0 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 60 l | 51 l |
| Emission standard: | EURO V | |
| CO2 emissions: | 118 g/km | |
| Power: | 140 hp | 100 hp |
| Max power in: | 6500 rpm. | 4500 rpm. |
| Maximum speed: | 185 km/h | |
| Acceleration from 0 to 100 km/h: | 10.7 sec | |
| Torque: | 186 Nm @ 4000 rpm. | 150 Nm/4000 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1995 cm3 | 1496 cm3 |
| Fuel System: | Multi-point injection | Direct injection |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9.7 | 14 |
| Piston Stroke: | 90 mm | |
| Cylinder Bore: | 84 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4575 mm | 4580 mm |
| Width: | 1695 mm | |
| Width with mirrors folded: | 1795 mm | |
| Width including mirrors: | 2053 mm | |
| Height: | 1440 mm | 1450 mm |
| Wheelbase: | 2610 mm | 2700 mm |
| Front track: | 1475 mm | |
| Rear (Back) track: | 1480 mm | |
| Ride height(clearance): | 155 mm | |
| Minimum volume of Luggage (trunk): | 419 l | |
| Max weight: | 1800 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Disc |
| Kerb Weight: | 1210 kg | 1190 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10 m | |
| Tire size: | 175/70 R14 | |
| Wheel rims size: | 5.5J x 14 ET 45 |