Comparison Toyota Cresta (GX80) 2.4 i (150 Hp) & Volvo V70 III (facelift 2013) 2.4 D4 (163 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Volvo |
| Model: | Cresta | V70 |
| Generation: | Cresta (GX80) | V70 III (facelift 2013) |
| Engine / modification: | 2.4 i (150 Hp) | 2.4 D4 (163 Hp) Automatic |
| Production start: | 1988 year | 2013 year |
| Production end: | 1992 year | 2016 year |
| Coupe type: | Combi | |
| Num. of Doors: | 5 | |
| Num. of seats: | 5 | |
| Fuel consumption / economy - combined: | 6.2 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 70 l | |
| CO2 emissions: | 164 g/km | |
| Power: | 150 hp | 163 hp |
| Max power in: | 6000 rpm. | 4000 rpm. |
| Maximum speed: | 205 km/h | |
| Acceleration from 0 to 100 km/h: | 10.8 sec | |
| Torque: | 194 Nm/4000 rpm. | 420 Nm/1500-2500 rpm. |
| Model Engine: | D5244T17 | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1998 cm3 | 2400 cm3 |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | DOHC |
| Number of cylinders: | 4 | 5 |
| Number of valves per cylinder: | 4 | 4 |
| Compression ratio: | 9.8 | 16.5 |
| Piston Stroke: | 86 mm | 93.2 mm |
| Cylinder Bore: | 86 mm | 81 mm |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 6 | |
| Length: | 4814 mm | |
| Width: | 1907 mm | |
| Height: | 1547 mm | |
| Wheelbase: | 2816 mm | |
| Front track: | 1588-1578 mm | |
| Rear (Back) track: | 1586-1576 mm | |
| Ride height(clearance): | 151 mm | |
| Minimum volume of Luggage (trunk): | 555 l | |
| Maximum amount of Luggage (trunk): | 1580 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.7 - 12.7 m |