Comparison Seat Leon III ST Cupra 2.0 TSI (265 Hp) start/stop
Add car |
Remove car |
| Brand: | Seat |
| Model: | Leon |
| Generation: | Leon III ST |
| Engine / modification: | Cupra 2.0 TSI (265 Hp) start/stop |
| Production start: | 2014 year |
| Production end: | 2015 year |
| Coupe type: | Combi |
| Num. of Doors: | 5 |
| Num. of seats: | 5 |
| Fuel consumption / economy - urban: | 8.8 l/100 km |
| Fuel consumption / economy - extra urban: | 5.6 l/100 km |
| Fuel consumption / economy - combined: | 6.7 l/100 km |
| Fuel Type: | Petrol (Gasoline) |
| Fuel tank volume: | 50 l |
| Emission standard: | Euro 6 |
| CO2 emissions: | 157 g/km |
| Power: | 265 hp |
| Max power in: | 5350-6600 rpm. |
| Maximum speed: | 250 km/h |
| Acceleration from 0 to 100 km/h: | 6.2 sec |
| Torque: | 350 Nm @ 1750-5300 rpm. |
| Model Engine: | CJXE |
| Engine position: | Front, transverse |
| Engine displacement: | 1984 cm3 |
| Engine oil capacity: | 5.7 l |
| Fuel System: | Direct injection |
| Aspiration / Turbine: | Turbocharging |
| Position of cylinders: | Inline |
| Number of cylinders: | 4 |
| Number of valves per cylinder: | 4 |
| Compression ratio: | 9.3 |
| Piston Stroke: | 92.8 mm |
| Cylinder Bore: | 82.5 mm |
| Wheel Drive: | Front wheel drive |
| Number of Gears (manual transmission): | 6 |
| Length: | 4543 mm |
| Width: | 1816 mm |
| Height: | 1431 mm |
| Wheelbase: | 2631 mm |
| Front track: | 1536 mm |
| Rear (Back) track: | 1510 mm |
| Minimum volume of Luggage (trunk): | 587 l |
| Front suspension: | Independent, Spring McPherson, with stabilizer |
| Rear suspension: | Multi-link independent |
| Max weight: | 1920 kg |
| Front brakes: | Ventilated discs |
| Rear brakes: | Ventilated discs |
| Kerb Weight: | 1440 kg |
| ABS: | yes |
| Steering type: | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10.5 m |
| Tire size: | 225/40 R18 92Y; 235/35 R19 91Y |
| Wheel rims size: | R18; R19 |