Comparison Volvo V60 I 2.0 D3 (163 Hp) S/S & Volvo V60 I 1.6 T3 (150 Hp) MT
Add car |
Remove car |
Remove car |
| Brand: | Volvo | Volvo |
| Model: | V60 | V60 |
| Generation: | V60 I | V60 I |
| Engine / modification: | 2.0 D3 (163 Hp) S/S | 1.6 T3 (150 Hp) MT |
| Production start: | 2012 year | 2011 year |
| Production end: | 2013 year | 2015 year |
| Coupe type: | Combi | Combi |
| Num. of Doors: | 5 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 7.1 l/100 km | 7.5 l/100 km |
| Fuel consumption / economy - extra urban: | 4.8 l/100 km | 5.1 l/100 km |
| Fuel consumption / economy - combined: | 5.7 l/100 km | 6.0 l/100 km |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 67.5 l | 67.5 l |
| Emission standard: | Euro 5 | Euro 5 |
| CO2 emissions: | 149 g/km | 156 g/km |
| Power: | 163 hp | 150 hp |
| Max power in: | 3500 rpm. | 5700 rpm. |
| Acceleration from 0 to 100 km/h: | 9.4 sec | 9.6 sec |
| Torque: | 400 Nm @ 1500-2750 rpm. | 240 Nm @ 1600-4000 rpm. |
| Model Engine: | D5204T3 | B4164T3 |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1984 cm3 | 1596 cm3 |
| Engine oil capacity: | 5.9 l | 4.1 l |
| Coolant: | 8.9 l | 9.2 l |
| Fuel System: | Diesel Commonrail | Direct injection |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | Turbocharging |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 5 | 4 |
| Piston Stroke: | 77 mm | 81.4 mm |
| Cylinder Bore: | 81 mm | 79 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4628 mm | 4628 mm |
| Width: | 1865 mm | 1865 mm |
| Height: | 1484 mm | 1484 mm |
| Wheelbase: | 2776 mm | 2776 mm |
| Front track: | 1588 mm | 1588 mm |
| Rear (Back) track: | 1585 mm | 1585 mm |
| Minimum volume of Luggage (trunk): | 692 l | 692 l |
| Max weight: | 2200 kg | 2100 kg |
| Kerb Weight: | 1616 kg | 1537 kg |
| ABS: | yes | yes |
| Minimum turning circle (turning diameter): | 11.5 m | 11.5 m |