Comparison Volvo S60 II (facelift 2013) 1.6 T4F (180 Hp) Ethanol Automatic & Volvo S90 2.9 24V (180 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Volvo | Volvo |
| Model: | S60 | S90 |
| Generation: | S60 II (facelift 2013) | S90 |
| Engine / modification: | 1.6 T4F (180 Hp) Ethanol Automatic | 2.9 24V (180 Hp) |
| Production start: | 2013 year | 1997 year |
| Production end: | 1998 year | |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 16.1 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.0 l/100 km | |
| Fuel consumption / economy - combined: | 6.8/9.4 l/100 km | 11.0 l/100 km |
| Fuel Type: | Petrol / Ethanol | Petrol (Gasoline) |
| Fuel tank volume: | 67.5 l | 80 l |
| CO2 emissions: | 159/154 g/km | |
| Power: | 180 hp | 180 hp |
| Max power in: | 5700 rpm. | |
| Maximum speed: | 225 km/h | 210 km/h |
| Acceleration from 0 to 100 km/h: | 9.0 sec | 9.0 sec |
| Torque: | 240 Nm/1620-4980 rpm. | |
| Model Engine: | B4164T2 | B6304S2 |
| Engine position: | Front, transverse | |
| Engine displacement: | 1596 cm3 | |
| Engine oil capacity: | 5.8 l | |
| Coolant: | 8.5 l | |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 10 | |
| Piston Stroke: | 81.4 mm | |
| Cylinder Bore: | 79 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 6 | |
| Length: | 4635 mm | 4871 mm |
| Width: | 1899 mm | 1750 mm |
| Height: | 1484 mm | 1422 mm |
| Wheelbase: | 2776 mm | |
| Front track: | 1588-1578 mm | |
| Rear (Back) track: | 1585-1575 mm | |
| Ride height(clearance): | 136 mm | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Independent, spring | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.5 m |