Comparison Holden Farad (4-type) 2.8 TDi 4X4 (113 Hp) & Subaru R2 0.7i 4WD (45 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Holden | Subaru |
| Model: | Farad | R2 |
| Generation: | Farad (4-type) | R2 |
| Engine / modification: | 2.8 TDi 4X4 (113 Hp) | 0.7i 4WD (45 Hp) |
| Production start: | 1998 year | 2003 year |
| Coupe type: | Off-road vehicle | Hatchback |
| Num. of Doors: | 3 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 16 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 80 l | 30 l |
| Power: | 113 hp | 45 hp |
| Max power in: | 3600 rpm. | 6400 rpm. |
| Maximum speed: | 147 km/h | |
| Acceleration from 0 to 100 km/h: | 9 sec | |
| Torque: | 260 Nm/2000 rpm. | 56 Nm/4000 rpm. |
| Engine position: | Front, longitudinal | Front, transverse |
| Engine displacement: | 2771 cm3 | 658 cm3 |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 2 | 4 |
| Compression ratio: | 10 | |
| Piston Stroke: | 66.8 mm | |
| Cylinder Bore: | 56 mm | |
| Wheel Drive: | Part time 4x4 | All wheel drive (4x4) |
| Number of Gears (automatic transmission): | - | |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 4192 mm | 3395 mm |
| Width: | 1780 mm | 1475 mm |
| Height: | 1721 mm | 1520 mm |
| Wheelbase: | 2330 mm | 2360 mm |
| Front track: | 1455 mm | 1295 mm |
| Rear (Back) track: | 1460 mm | 1285 mm |
| Minimum volume of Luggage (trunk): | 300 l | |
| Maximum amount of Luggage (trunk): | 1160 l | |
| Front suspension: | Helical spring | |
| Rear suspension: | Helical spring | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Ventilated discs | Drum |
| Kerb Weight: | 1828 kg | 770 kg |
| ABS: | yes | |
| Power steering: | Hydraulic Steering | |
| Tire size: | 245/70 R16 | 155/65R14 |