Comparison Volkswagen Golf II (19E) 1.8 (90 Hp) & Subaru Justy I (KAD) 1000 4WD (KAD-A) (3 dr) (55 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Volkswagen | Subaru |
| Model: | Golf | Justy |
| Generation: | Golf II (19E) | Justy I (KAD) |
| Engine / modification: | 1.8 (90 Hp) | 1000 4WD (KAD-A) (3 dr) (55 Hp) |
| Production start: | 1984 year | 1983 year |
| Production end: | 1991 year | 1989 year |
| Coupe type: | Hatchback | Hatchback |
| Num. of Doors: | 3 | 3 |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 7.2 l/100 km | |
| Fuel consumption / economy - extra urban: | 6.8 l/100 km | |
| Fuel consumption / economy - combined: | 8.2 l/100 km | 7.2 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 35 l |
| Power: | 90 hp | 55 hp |
| Max power in: | 6000 rpm. | |
| Maximum speed: | 175 km/h | 140 km/h |
| Acceleration from 0 to 100 km/h: | 11.5 sec | 15.5 sec |
| Torque: | 79 Nm @ 3600 rpm. | |
| Model Engine: | GU, EX, RP | J10 |
| Engine position: | Front, transverse | |
| Engine displacement: | 998 cm3 | |
| Engine oil capacity: | 3-4 l | 3 l |
| Coolant: | 6.3-6.5 l | 4 l |
| Fuel System: | Mono-point injection | Carburettor |
| Position of cylinders: | Inline | |
| Number of cylinders: | 3 | |
| Number of valves per cylinder: | 3 | |
| Compression ratio: | 9.5 | |
| Piston Stroke: | 69.6 mm | |
| Cylinder Bore: | 78 mm | |
| Wheel Drive: | Front wheel drive | All wheel drive (4x4) |
| Number of Gears (automatic transmission): | - | |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 3695 mm | |
| Width: | 1535 mm | |
| Height: | 1420 mm | |
| Wheelbase: | 2285 mm | |
| Front track: | 1330 mm | |
| Rear (Back) track: | 1290 mm | |
| Minimum volume of Luggage (trunk): | 160 l | |
| Maximum amount of Luggage (trunk): | 980 l | |
| Front suspension: | The depreciated rack | |
| Rear suspension: | Wishbone | |
| Front brakes: | Disc | Disc |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 913 kg | 750 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 9.8 m |