Comparison Seat Leon III SC FR 1.8 TSI (180 Hp) start/stop & Skoda 130 G,GL (S136) (63 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Seat | Skoda |
| Model: | Leon | 130 |
| Generation: | Leon III SC | 130 |
| Engine / modification: | FR 1.8 TSI (180 Hp) start/stop | G,GL (S136) (63 Hp) |
| Production start: | 2012 year | 1988 year |
| Production end: | 2016 year | 1990 year |
| Coupe type: | Coupe | Sedan |
| Num. of Doors: | 3 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 7.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.9 l/100 km | |
| Fuel consumption / economy - combined: | 5.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | 36 l |
| Emission standard: | Euro 6 | |
| CO2 emissions: | 137 g/km | |
| Power: | 180 hp | 63 hp |
| Max power in: | 5100-6200 rpm. | |
| Maximum speed: | 226 km/h | |
| Acceleration from 0 to 100 km/h: | 7.4 sec | |
| Torque: | 250 Nm @ 1250-5000 rpm. | |
| Model Engine: | CJSA, CJSB | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1798 cm3 | |
| Engine oil capacity: | 5.2 l | 4.6 l |
| Coolant: | 11.5 l | |
| Fuel System: | Direct injection | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9.6 | |
| Piston Stroke: | 84.2 mm | |
| Cylinder Bore: | 82.5 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4236 mm | |
| Width: | 1810 mm | |
| Height: | 1431 mm | |
| Wheelbase: | 2596 mm | |
| Front track: | 1534 mm | |
| Rear (Back) track: | 1508 mm | |
| Minimum volume of Luggage (trunk): | 380 l | |
| Maximum amount of Luggage (trunk): | 1150 l | |
| Max weight: | 1830 kg | |
| Kerb Weight: | 1290 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion |