Comparison Nissan Pulsar (N15) 1.6 i (175Hp) & Seat Leon III ST 2.0 TDI (150 Hp) start/stop
Add car |
Remove car |
Remove car |
| Brand: | Nissan | Seat |
| Model: | Pulsar | Leon |
| Generation: | Pulsar (N15) | Leon III ST |
| Engine / modification: | 1.6 i (175Hp) | 2.0 TDI (150 Hp) start/stop |
| Production start: | 1995 year | 2014 year |
| Production end: | 2000 year | 2015 year |
| Coupe type: | Sedan | Combi |
| Num. of Doors: | 4 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 5.0 l/100 km | |
| Fuel consumption / economy - extra urban: | 3.6 l/100 km | |
| Fuel consumption / economy - combined: | 4.1 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 106 g/km | |
| Power: | 175 hp | 150 hp |
| Max power in: | 3500-4000 rpm. | |
| Maximum speed: | 215 km/h | |
| Acceleration from 0 to 100 km/h: | 8.6 sec | |
| Torque: | 320 Nm @ 1750-3000 rpm. | |
| Model Engine: | CRBC, CKFC, CRLB, CRMB | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1597 cm3 | 1968 cm3 |
| Engine oil capacity: | 4.6-4.7 l | |
| Fuel System: | Multi-point injection | Diesel Commonrail |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 16 | |
| Piston Stroke: | 95.5 mm | |
| Cylinder Bore: | 81 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4535 mm | |
| Width: | 1816 mm | |
| Height: | 1451 mm | |
| Wheelbase: | 2636 mm | |
| Front track: | 1549 mm | |
| Rear (Back) track: | 1520 mm | |
| Minimum volume of Luggage (trunk): | 587 l | |
| Maximum amount of Luggage (trunk): | 1470 l | |
| Max weight: | 1920 kg | |
| Kerb Weight: | 1350 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion |