Comparison Toyota Yaris Sedan (facelift 2019) 1.5 (106 Hp) & Porsche Cayman (987c) S 3.4 (295 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Porsche |
| Model: | Yaris | Cayman |
| Generation: | Yaris Sedan (facelift 2019) | Cayman (987c) |
| Engine / modification: | 1.5 (106 Hp) | S 3.4 (295 Hp) |
| Production start: | 2019 year | 2005 year |
| Coupe type: | Sedan | Coupe |
| Num. of Doors: | 4 | 2 |
| Num. of seats: | 5 | 2 |
| Fuel consumption / economy - urban: | 7.8 l/100 km | 15.3 l/100 km |
| Fuel consumption / economy - extra urban: | 6.0 l/100 km | 7.8 l/100 km |
| Fuel consumption / economy - combined: | 6.9 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 44 l | 64 l |
| Power: | 106 hp | 295 hp |
| Max power in: | 6000 rpm. | |
| Maximum speed: | 275 km/h | |
| Acceleration from 0 to 100 km/h: | 5.4 sec | |
| Torque: | 140 Nm @ 4000 rpm. | 350 Nm/4400 rpm. |
| Engine position: | Front, transverse | Middle, longitudinal |
| Engine displacement: | 1496 cm3 | 3387 cm3 |
| Fuel System: | Multi-point injection | |
| Position of cylinders: | Inline | Boxer |
| Valvetrain: | DOHC, D-VVT-i | DOHC |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 4 | 4 |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 6 | 6 |
| Length: | 4348 mm | 4341 mm |
| Width: | 1694 mm | 1801 mm |
| Height: | 1486 mm | 1305 mm |
| Wheelbase: | 2570 mm | 2415 mm |
| Front track: | 1496 mm | |
| Rear (Back) track: | 1486 mm | |
| Ride height(clearance): | 140 mm | |
| Minimum volume of Luggage (trunk): | 382 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Torsion | |
| Max weight: | 1630 kg | |
| Front brakes: | Ventilated discs | Ventilated discs |
| Rear brakes: | Drum | Ventilated discs |
| Kerb Weight: | 1082-1089 kg | 1340 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 9.81 m |