Car technical specifications and fuel economy / consumption / mpg

Comparison Peugeot 306 Break (7E) 1.9d (69 Hp) & Peugeot 308 CC I 2.0 HDi FAP (140 Hp)


Add car
Peugeot 306 Break (7E) 1.9d (69 Hp)
Remove car
Peugeot 308 CC I 2.0 HDi FAP (140 Hp)
Remove car
Brand: Peugeot Peugeot
Model: 306 308
Generation: 306 Break (7E) 308 CC I
Engine / modification: 1.9d (69 Hp) 2.0 HDi FAP (140 Hp)
Production start: 1998 year 2009 year
Production end: 2002 year 2011 year
Coupe type: Combi Coupe - Cabriolet
Num. of Doors: 5 2
Num. of seats: 5 4
Fuel consumption / economy - urban: 8.3 l/100 km 7.8 l/100 km
Fuel consumption / economy - extra urban: 5 l/100 km 4.8 l/100 km
Fuel consumption / economy - combined: 5.9 l/100 km
Fuel Type: Diesel Diesel
Fuel tank volume: 60 l 60 l
Emission standard: EURO IV
Power: 69 hp 140 hp
Max power in: 4600 rpm. 4000 rpm.
Maximum speed: 162 km/h 208 km/h
Acceleration from 0 to 100 km/h: 17.9 sec 10.8 sec
Torque: 125 Nm @ 2500 rpm. 320 Nm/2000 rpm.
Engine position: Front, transverse Front, transverse
Engine displacement: 1868 cm3 1997 cm3
Fuel System: Diesel Commonrail Diesel Commonrail
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Valvetrain: OHC DOHC
Number of cylinders: 4 4
Number of valves per cylinder: 2 4
Compression ratio: 23 17.6
Piston Stroke: 88 mm 88 mm
Cylinder Bore: 82.2 mm 85 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): -
Number of Gears (manual transmission): 5 6
Length: 4338 mm 4440 mm
Width: 1680 mm 1817 mm
Height: 1415 mm 1427 mm
Wheelbase: 2580 mm 2608 mm
Front track: 1423-1433 mm 1526 mm
Rear (Back) track: 1424-1432 mm 1521 mm
Front overhang: 815 mm
Rear overhang: 943 mm
Minimum volume of Luggage (trunk): 442 l 226 l
Maximum amount of Luggage (trunk): 1512 l 403 l
Front suspension: Wishbone Wishbone
Rear suspension: Trailing Wishbone
Max weight: 1625 kg 2020 kg
Front brakes: Disc Ventilated discs
Rear brakes: Drum Disc
Kerb Weight: 1140 kg 1674 kg
ABS: yes yes
Steering type: Steering rack and pinion Steering rack and pinion
Power steering: Hydraulic Steering Hydraulic Steering
Minimum turning circle (turning diameter): 11.8 m
Tire size: 185/65 R14 225/40 R18
Wheel rims size: 8J 18