Comparison Toyota Sienna II 3.3 i V6 24V (233 Hp) AWD & Opel Kadett D 1.2 S (60 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Opel |
| Model: | Sienna | Kadett |
| Generation: | Sienna II | Kadett D |
| Engine / modification: | 3.3 i V6 24V (233 Hp) AWD | 1.2 S (60 Hp) |
| Production start: | 2003 year | 1979 year |
| Production end: | 2006 year | 1984 year |
| Coupe type: | Minivan | Hatchback |
| Num. of Doors: | 5 | 3/5 |
| Num. of seats: | 8 | 5 |
| Fuel consumption / economy - urban: | 13.1 l/100 km | |
| Fuel consumption / economy - extra urban: | 9.8 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 76 l | 42 l |
| Power: | 233 hp | 60 hp |
| Max power in: | 5600 rpm. | 5800 rpm. |
| Maximum speed: | 178 km/h | 147 km/h |
| Acceleration from 0 to 100 km/h: | 16 sec | |
| Torque: | 328 Nm @ 3600 rpm. | 88 Nm @ 3000-3600 rpm. |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 3303 cm3 | 1196 cm3 |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | - | OHV |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 10.8 | 9 |
| Piston Stroke: | 83 mm | 61 mm |
| Cylinder Bore: | 92 mm | 79 mm |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (automatic transmission): | 5 | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 5080 mm | 3998 mm |
| Width: | 1966 mm | 1636 mm |
| Height: | 1750 mm | 1380 mm |
| Wheelbase: | 3030 mm | 2514 mm |
| Front track: | 1666 mm | 1400 mm |
| Rear (Back) track: | 1700 mm | 1406 mm |
| Minimum volume of Luggage (trunk): | 1235 l | 490 l |
| Maximum amount of Luggage (trunk): | 4217 l | 1360 l |
| Front suspension: | The depreciated rack | |
| Rear suspension: | Transverse stabilizer | |
| Max weight: | 1270 kg | |
| Front brakes: | Disc | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 2020 kg | 815 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.5 m | |
| Tire size: | 225/60 R16 |