Car technical specifications and fuel economy / consumption / mpg

Comparison Lada 21104 1.6 i 16V (90 Hp) & Opel Insignia Country Tourer 2.0 CDTI (195 Hp) Ecotec start/stop


Add car
Lada 21104 1.6 i 16V (90 Hp)
Remove car
Opel Insignia Country Tourer 2.0 CDTI (195 Hp) Ecotec start/stop
Remove car
Brand: Lada Opel
Model: 2110 Insignia
Generation: 21104 Insignia Country Tourer
Engine / modification: 1.6 i 16V (90 Hp) 2.0 CDTI (195 Hp) Ecotec start/stop
Production start: 2001 year 2013 year
Production end: 2007 year
Coupe type: Sedan Combi
Num. of Doors: 4 5
Num. of seats: 5 5
Fuel consumption / economy - urban: 7.7 l/100 km 6.1 l/100 km
Fuel consumption / economy - extra urban: 5.5 l/100 km 4.2 l/100 km
Fuel consumption / economy - combined: 7.2 l/100 km 4.9 l/100 km
Fuel Type: Petrol (Gasoline) Diesel
Fuel tank volume: 43 l 70 l
Emission standard: EURO V
CO2 emissions: 129 g/km
Power: 90 hp 195 hp
Max power in: 5000 rpm. 4000 rpm.
Maximum speed: 180 km/h 225 km/h
Acceleration from 0 to 100 km/h: 12 sec 8.9 sec
Torque: 131 Nm @ 3700 rpm. 400 Nm/1750-2500 rpm.
Engine position: Front, transverse Front, transverse
Engine displacement: 1596 cm3 1956 cm3
Fuel System: Multi-point injection Diesel Commonrail
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Valvetrain: -
Number of cylinders: 4 4
Number of valves per cylinder: 4
Piston Stroke: 90.4 mm
Cylinder Bore: 83 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (manual transmission): 5 6
Length: 4265 mm 4920 mm
Width: 1680 mm 1856 mm
Height: 1420 mm 1522 mm
Wheelbase: 2492 mm 2737 mm
Front track: 1410 mm 1587 mm
Rear (Back) track: 1380 mm 1590 mm
Minimum volume of Luggage (trunk): 540 l
Maximum amount of Luggage (trunk): 450 l 1530 l
Front suspension: McPherson
Rear suspension: Threaded twist beam
Max weight: 1515 kg
Front brakes: Disc Ventilated discs
Rear brakes: Drum
Kerb Weight: 1040 kg
ABS: yes
Steering type: Steering rack and pinion Steering rack and pinion
Power steering: Electric Steering
Minimum turning circle (turning diameter): 11.4 m