Car technical specifications and fuel economy / consumption / mpg

Comparison Seat Leon III 2.0 TDI (150 Hp) DSG start/stop & Opel Commodore B Coupe 2.8 GS/E (160 Hp)


Add car
Seat Leon III 2.0 TDI (150 Hp) DSG start/stop
Remove car
Opel Commodore B Coupe 2.8 GS/E (160 Hp)
Remove car
Brand: Seat Opel
Model: Leon Commodore
Generation: Leon III Commodore B Coupe
Engine / modification: 2.0 TDI (150 Hp) DSG start/stop 2.8 GS/E (160 Hp)
Production start: 2012 year 1973 year
Production end: 2015 year 1975 year
Coupe type: Hatchback Coupe
Num. of Doors: 5 2
Num. of seats: 5 5
Fuel consumption / economy - urban: 5.2 l/100 km
Fuel consumption / economy - extra urban: 4.0 l/100 km
Fuel consumption / economy - combined: 4.4 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Drag coefficient: 0.45
Fuel tank volume: 50 l 70 l
Emission standard: Euro 5
CO2 emissions: 117 g/km
Power: 150 hp 160 hp
Max power in: 3500-4000 rpm. 5300 rpm.
Maximum speed: 211 km/h 190 km/h
Acceleration from 0 to 100 km/h: 8.4 sec 11 sec
Torque: 320 Nm @ 1750-3000 rpm. 235 Nm/4000 rpm.
Model Engine: CKFC, CRBC, CRLB, CRMB
Engine position: Front, transverse
Engine displacement: 1968 cm3 2784 cm3
Engine oil capacity: 4.6-4.7 l
Fuel System: Diesel Commonrail Carburettor
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Valvetrain: SOHC
Number of cylinders: 4 6
Number of valves per cylinder: 4 2
Compression ratio: 16 9.5
Piston Stroke: 95.5 mm 69.8 mm
Cylinder Bore: 81 mm 92 mm
Wheel Drive: Front wheel drive
Number of Gears (automatic transmission): 6 DSG
Number of Gears (manual transmission): 4
Length: 4263 mm 4607 mm
Width: 1816 mm 1728 mm
Height: 1459 mm 1370 mm
Wheelbase: 2636 mm 2668 mm
Front track: 1549 mm 1450 mm
Rear (Back) track: 1520 mm 1400 mm
Ride height(clearance): 140 mm
Minimum volume of Luggage (trunk): 380 l 434 l
Maximum amount of Luggage (trunk): 1210 l
Max weight: 1840 kg 1660 kg
Front brakes: Disc
Rear brakes: Drum
Kerb Weight: 1335 kg 1240 kg
ABS: yes
Steering type: Steering rack and pinion
Minimum turning circle (turning diameter): 11.2 m