Car technical specifications and fuel economy / consumption / mpg

Comparison ZAZ Chance Sedan 1.3 (70 Hp) & Volvo S40 II (facelift 2007) 2.0 D4 (177 Hp)


Add car
ZAZ Chance Sedan 1.3 (70 Hp)
Remove car
Volvo S40 II (facelift 2007) 2.0 D4 (177 Hp)
Remove car
Brand: ZAZ Volvo
Model: Chance S40
Generation: Chance Sedan S40 II (facelift 2007)
Engine / modification: 1.3 (70 Hp) 2.0 D4 (177 Hp)
Production start: 2009 year 2011 year
Production end: 2012 year
Coupe type: Hatchback Sedan
Num. of Doors: 5 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 10.4 l/100 km 7.0 l/100 km
Fuel consumption / economy - extra urban: 4.0 l/100 km
Fuel consumption / economy - combined: 5.1 l/100 km
Fuel Type: Petrol (Gasoline) Diesel
Fuel tank volume: 48 l 60 l
Emission standard: EURO III Euro 5
CO2 emissions: 134 g/km
Power: 70 hp 177 hp
Max power in: 5500 rpm. 3500 rpm.
Maximum speed: 172 km/h
Acceleration from 0 to 100 km/h: 12.5 sec 8.7 sec
Torque: 108 Nm/3250 rpm. 400 Nm @ 1750-2750 rpm.
Model Engine: D5204T
Engine position: Front, transverse Front, transverse
Engine displacement: 1299 cm3 1984 cm3
Engine oil capacity: 5.9 l
Fuel System: Multi-point injection Diesel Commonrail
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline Inline
Valvetrain: -
Number of cylinders: 4 5
Number of valves per cylinder: 2
Compression ratio: 9.8
Piston Stroke: 73.5 mm 81 mm
Cylinder Bore: 75 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): 6
Number of Gears (manual transmission): 5 6
Length: 4237 mm 4476 mm
Width: 1679 mm 1770 mm
Height: 1432 mm 1454 mm
Wheelbase: 2520 mm 2640 mm
Front track: 1405 mm 1548 mm
Rear (Back) track: 1425 mm 1544 mm
Minimum volume of Luggage (trunk): 404 l
Front suspension: Independent, Spring McPherson, with stabilizer
Rear suspension: Torsion
Max weight: 1595 kg 2020 kg
Front brakes: Ventilated discs
Rear brakes: Drum
Kerb Weight: 1197 kg 1498 kg
ABS: yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 11.1 m