Comparison ZAZ 966 0.9 (27 Hp) & Toyota Land Cruiser (J60) Wagon 4.0 (150 Hp) 4WD
Add car |
Remove car |
Remove car |
| Brand: | ZAZ | Toyota |
| Model: | 966 | Land Cruiser |
| Generation: | 966 | Land Cruiser (J60) Wagon |
| Engine / modification: | 0.9 (27 Hp) | 4.0 (150 Hp) 4WD |
| Production start: | 1967 year | 1985 year |
| Production end: | 1972 year | 1989 year |
| Coupe type: | Sedan | SUV |
| Powertrain Architecture: | Internal Combustion engine | |
| Num. of Doors: | 2 | 5 |
| Num. of seats: | 5 | 5 |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 90 l | |
| Power: | 27 hp | 150 hp |
| Max power in: | 4000 rpm. | 4200 rpm. |
| Torque: | 52 Nm/2600 rpm. | 284 Nm @ 2200 rpm. |
| Model Engine: | МеМЗ-965 | 3F |
| Engine position: | Rear, longitudinal | Front, longitudinal |
| Engine displacement: | 887 cm3 | 3955 cm3 |
| Engine oil capacity: | 7.8 l | |
| Coolant: | 19.5 l | |
| Fuel System: | Carburettor | Multi-point indirect injection |
| Aspiration / Turbine: | Naturally aspirated engine | |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | - | OHV |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 6.5 | 8.1 |
| Piston Stroke: | 54.5 mm | 95 mm |
| Cylinder Bore: | 72 mm | 94 mm |
| Wheel Drive: | Rear wheel drive | All wheel drive (4x4) |
| Number of Gears (automatic transmission): | - | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 3730 mm | 4675 mm |
| Width: | 1570 mm | 1800 mm |
| Height: | 1400 mm | 1825 mm |
| Wheelbase: | 2160 mm | 2730 mm |
| Front track: | 1220 mm | 1475 mm |
| Rear (Back) track: | 1200 mm | 1460 mm |
| Ride height(clearance): | 225 mm | |
| Front overhang: | 725 mm | |
| Rear overhang: | 1220 mm | |
| Maximum amount of Luggage (trunk): | 2775 l | |
| Front suspension: | Independent, spring | |
| Rear suspension: | Independent, spring | |
| Max weight: | 2810 kg | |
| Front brakes: | Drum | Ventilated discs |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 1965 kg | |
| Steering type: | Cone worm with recirculation balls | Cone worm with recirculation balls |
| Minimum turning circle (turning diameter): | 11.8 m | 13.4 m |