Comparison Zastava Yugo Koral 1.1i (62 Hp) & Citroen Dyane I (Phase III) Dyane 4 (24 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Zastava | Citroen |
| Model: | Yugo | Dyane |
| Generation: | Yugo Koral | Dyane I (Phase III) |
| Engine / modification: | 1.1i (62 Hp) | Dyane 4 (24 Hp) |
| Production start: | 2003 year | 1975 year |
| Production end: | 2008 year | 1976 year |
| Coupe type: | Hatchback | Hatchback |
| Num. of Doors: | 3 | 5 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - combined: | 5.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 48 l | 20 l |
| Power: | 62 hp | 24 hp |
| Max power in: | 5600 rpm. | 6750 rpm. |
| Maximum speed: | 150 km/h | 104 km/h |
| Acceleration from 0 to 100 km/h: | 15 sec | |
| Torque: | 85 Nm/3800 rpm. | 30 Nm @ 4000 rpm. |
| Model Engine: | AYA2 | |
| Engine position: | Front, transverse | |
| Engine displacement: | 1116 cm3 | 435 cm3 |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | Inline | Boxer |
| Number of cylinders: | 4 | 2 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 9.2 | 8.5 |
| Piston Stroke: | 55.5 mm | 59 mm |
| Cylinder Bore: | 80 mm | 68.5 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | - | |
| Number of Gears (manual transmission): | 5 | 4 |
| Length: | 3552 mm | 3874 mm |
| Width: | 1548 mm | 1500 mm |
| Height: | 1345 mm | 1525 mm |
| Wheelbase: | 2150 mm | 2400 mm |
| Front track: | 1308 mm | 1260 mm |
| Rear (Back) track: | 1312 mm | 1260 mm |
| Ride height(clearance): | 155 mm | |
| Front overhang: | 689 mm | |
| Rear overhang: | 785 mm | |
| Minimum volume of Luggage (trunk): | 170 l | 280 l |
| Maximum amount of Luggage (trunk): | 870 l | 1340 l |
| Front suspension: | Helical spring | |
| Rear suspension: | Helical spring | |
| Max weight: | 1230 kg | 925 kg |
| Front brakes: | Disc | Drum |
| Rear brakes: | Drum | Drum |
| Kerb Weight: | 830 kg | 590 kg |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 10.7 m | |
| Tire size: | 155/70 R13 |