Comparison Volvo XC60 I 2.0 Drive (163 Hp) & Volvo C70 Coupe Cabrio II 2.4 D5 (180 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Volvo | Volvo |
| Model: | XC60 | C70 |
| Generation: | XC60 I | C70 Coupe Cabrio II |
| Engine / modification: | 2.0 Drive (163 Hp) | 2.4 D5 (180 Hp) |
| Production start: | 2010 year | 2006 year |
| Production end: | 2012 year | 2009 year |
| Coupe type: | SUV | Coupe - Cabriolet |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | 4 |
| Fuel consumption / economy - urban: | 6.9 l/100 km | 8.7 l/100 km |
| Fuel consumption / economy - extra urban: | 4.9 l/100 km | 5.4 l/100 km |
| Fuel consumption / economy - combined: | 5.7 l/100 km | 6.6 l/100 km |
| Fuel Type: | Diesel | Diesel |
| Fuel tank volume: | 70 l | 60 l |
| Emission standard: | EURO V | |
| Power: | 163 hp | 180 hp |
| Max power in: | 3500 rpm. | 4000 rpm. |
| Maximum speed: | 200 km/h | |
| Acceleration from 0 to 100 km/h: | 10.3 sec | 9.0 sec |
| Torque: | 400 Nm/1500-2750 rpm. | 350 Nm/1750-3250 rpm. |
| Model Engine: | D5204T3 | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1984 cm3 | 2400 cm3 |
| Fuel System: | Diesel Commonrail | Diesel - Standard diesel injection (SDI) |
| Aspiration / Turbine: | Turbo / Intercooler (Turbocharging / Intercooler) | Turbo / Intercooler (Turbocharging / Intercooler) |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 5 | 5 |
| Piston Stroke: | 77 mm | 81 mm |
| Cylinder Bore: | 81 mm | |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 5 | |
| Number of Gears (manual transmission): | 6 | 6 |
| Length: | 4627 mm | 4582 mm |
| Width: | 1891 mm | 1847 mm |
| Height: | 1713 mm | 1400 mm |
| Wheelbase: | 2774 mm | 2640 mm |
| Front track: | 1632 mm | 1550 mm |
| Rear (Back) track: | 1586 mm | 1560 mm |
| Minimum volume of Luggage (trunk): | 495 l | 404 l |
| Max weight: | 2505 kg | 2090 kg |
| Kerb Weight: | 1719 kg | 1684 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 12.1 m | 11.95 m |