Comparison Volvo V60 I (2013 facelift) 2.4 D5 (215 Hp) Automatic & Toyota Vista (V20) 1.8 (90 Hp) Automatic
Add car |
Remove car |
Remove car |
| Brand: | Volvo | Toyota |
| Model: | V60 | Vista |
| Generation: | V60 I (2013 facelift) | Vista (V20) |
| Engine / modification: | 2.4 D5 (215 Hp) Automatic | 1.8 (90 Hp) Automatic |
| Production start: | 2013 year | 1986 year |
| Production end: | 2015 year | 1990 year |
| Coupe type: | Combi | Sedan |
| Num. of Doors: | 5 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 8.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.9 l/100 km | |
| Fuel consumption / economy - combined: | 6.2 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Fuel tank volume: | 67.5 l | |
| Emission standard: | Euro 5 | |
| CO2 emissions: | 162 g/km | |
| Power: | 215 hp | 90 hp |
| Max power in: | 4000 rpm. | 5200 rpm. |
| Acceleration from 0 to 100 km/h: | 7.7 sec | |
| Torque: | 440 Nm @ 1500-3000 rpm. | 142 Nm @ 3400 rpm. |
| Model Engine: | D5244T15 | 1S I4 |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 2400 cm3 | 1832 cm3 |
| Engine oil capacity: | 5.9 l | |
| Coolant: | 8.9 l | |
| Fuel System: | Diesel Commonrail | Multi-point injection |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | |
| Number of cylinders: | 5 | 4 |
| Number of valves per cylinder: | 4 | |
| Compression ratio: | 9 | |
| Piston Stroke: | 93.15 mm | 89.9 mm |
| Cylinder Bore: | 81 mm | 80.5 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (automatic transmission): | 6 | 4 |
| Length: | 4635 mm | 4520 mm |
| Width: | 1825 mm | 1690 mm |
| Height: | 1484 mm | 1370 mm |
| Wheelbase: | 2776 mm | 2600 mm |
| Front track: | 1588 mm | |
| Rear (Back) track: | 1585 mm | |
| Minimum volume of Luggage (trunk): | 430 l | |
| Max weight: | 2200 kg | |
| Kerb Weight: | 1740 kg | 1210 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 11.3 m |