Car technical specifications and fuel economy / consumption / mpg

Comparison Volvo V50 2.0 D (136 Hp) & Volvo S80 II (facelift 2011) 3.2 (243 Hp)


Add car
Volvo V50 2.0 D (136 Hp)
Remove car
Volvo S80 II (facelift 2011) 3.2 (243 Hp)
Remove car
Brand: Volvo Volvo
Model: V50 S80
Generation: V50 S80 II (facelift 2011)
Engine / modification: 2.0 D (136 Hp) 3.2 (243 Hp)
Production start: 2004 year 2011 year
Production end: 2007 year 2013 year
Coupe type: Combi Sedan
Num. of Doors: 5 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 13.1 l/100 km
Fuel consumption / economy - extra urban: 6.6 l/100 km
Fuel consumption / economy - combined: 5.6 l/100 km 8.9 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Fuel tank volume: 52 l 70 l
Emission standard: Euro 5
CO2 emissions: 148 g/km 208 g/km
Power: 136 hp 243 hp
Max power in: 4000 rpm. 6400 rpm.
Maximum speed: 210 km/h
Acceleration from 0 to 100 km/h: 9.6 sec 7.9 sec
Torque: 320 Nm @ 2000 rpm. 320 Nm @ 3200 rpm.
Model Engine: D4204T B6324S5
Engine position: Front, transverse Front, transverse
Engine displacement: 1998 cm3 3192 cm3
Engine oil capacity: 5.5 l 6.8 l
Coolant: 9.5 l 8.9 l
Fuel System: Diesel Commonrail Multi-point injection
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Valvetrain: -
Number of cylinders: 4 6
Number of valves per cylinder: 4
Compression ratio: 18.5
Piston Stroke: 88 mm 84 mm
Cylinder Bore: 85 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): - 6
Number of Gears (manual transmission): 5
Length: 4514 mm 4851 mm
Width: 1770 mm 1861 mm
Height: 1452 mm 1493 mm
Wheelbase: 2640 mm 2835 mm
Front track: 1535 mm 1588 mm
Rear (Back) track: 1531 mm 1585 mm
Minimum volume of Luggage (trunk): 417 l 480 l
Maximum amount of Luggage (trunk): 1307 l
Front suspension: Transverse stabilizer
Rear suspension: Transverse stabilizer
Max weight: 2150 kg
Front brakes: Ventilated discs
Rear brakes: Ventilated discs
Kerb Weight: 1456 kg 1638 kg
ABS: yes yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 11.7 m