Car technical specifications and fuel economy / consumption / mpg

Comparison Volvo S80 II (facelift 2011) 2.0 D4 (163 Hp) & Seat Leon III SC 1.2 TSI (86 Hp)


Add car
Volvo S80 II (facelift 2011) 2.0 D4 (163 Hp)
Remove car
Seat Leon III SC 1.2 TSI (86 Hp)
Remove car
Brand: Volvo Seat
Model: S80 Leon
Generation: S80 II (facelift 2011) Leon III SC
Engine / modification: 2.0 D4 (163 Hp) 1.2 TSI (86 Hp)
Production start: 2011 year 2012 year
Production end: 2013 year 2016 year
Coupe type: Sedan Coupe
Num. of Doors: 4 3
Num. of seats: 5 5
Fuel consumption / economy - urban: 5.1 l/100 km 6.5 l/100 km
Fuel consumption / economy - extra urban: 3.9 l/100 km 4.4 l/100 km
Fuel consumption / economy - combined: 4.3 l/100 km 5.2 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Fuel tank volume: 70 l 50 l
Emission standard: Euro 5 Euro 6
CO2 emissions: 114 g/km 119 g/km
Power: 163 hp 86 hp
Max power in: 3500 rpm. 4300-5300 rpm.
Maximum speed: 178 km/h
Acceleration from 0 to 100 km/h: 9.7 sec 11.8 sec
Torque: 400 Nm @ 1500-2750 rpm. 160 Nm @ 1400-3500 rpm.
Model Engine: D5204T3 CJZB, CYVA
Engine position: Front, transverse Front, transverse
Engine displacement: 1984 cm3 1197 cm3
Engine oil capacity: 5.9 l 4 l
Coolant: 8.9 l
Fuel System: Diesel Commonrail Direct injection
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler) Turbocharging
Position of cylinders: Inline Inline
Number of cylinders: 5 4
Number of valves per cylinder: 4
Compression ratio: 10.5
Piston Stroke: 81 mm 75.6 mm
Cylinder Bore: 71 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): 6
Number of Gears (manual transmission): 6 5
Length: 4851 mm 4228 mm
Width: 1861 mm 1810 mm
Height: 1493 mm 1446 mm
Wheelbase: 2835 mm 2601 mm
Front track: 1588 mm 1549 mm
Rear (Back) track: 1585 mm 1525 mm
Minimum volume of Luggage (trunk): 480 l 380 l
Maximum amount of Luggage (trunk): 1150 l
Max weight: 2190 kg 1700 kg
Kerb Weight: 1612 kg 1168 kg
ABS: yes yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 11.7 m