Comparison Volvo S80 II (facelift 2011) 1.6 T4 (180 Hp) & Volvo S80 II (facelift 2011) 3.2 (243 Hp) AWD
Add car |
Remove car |
Remove car |
| Brand: | Volvo | Volvo |
| Model: | S80 | S80 |
| Generation: | S80 II (facelift 2011) | S80 II (facelift 2011) |
| Engine / modification: | 1.6 T4 (180 Hp) | 3.2 (243 Hp) AWD |
| Production start: | 2011 year | 2011 year |
| Production end: | 2013 year | 2013 year |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 8.8 l/100 km | 13.7 l/100 km |
| Fuel consumption / economy - extra urban: | 5.3 l/100 km | 7.0 l/100 km |
| Fuel consumption / economy - combined: | 6.6 l/100 km | 9.4 l/100 km |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 70 l | 70 l |
| Emission standard: | Euro 5 | Euro 5 |
| CO2 emissions: | 152 g/km | 219 g/km |
| Power: | 180 hp | 243 hp |
| Max power in: | 5700 rpm. | 6400 rpm. |
| Acceleration from 0 to 100 km/h: | 8.5 sec | 8.2 sec |
| Torque: | 240 Nm @ 1600-5000 rpm. | 320 Nm @ 3200 rpm. |
| Model Engine: | B4164T | B6324S5 |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1596 cm3 | 3192 cm3 |
| Engine oil capacity: | 4.1 l | 6.8 l |
| Coolant: | 9.2 l | 8.9 l |
| Fuel System: | Multi-point injection | Multi-point injection |
| Position of cylinders: | Inline | Inline |
| Number of cylinders: | 4 | 6 |
| Piston Stroke: | 79 mm | 84 mm |
| Wheel Drive: | Front wheel drive | All wheel drive (4x4) |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 6 | |
| Length: | 4851 mm | 4851 mm |
| Width: | 1861 mm | 1861 mm |
| Height: | 1493 mm | 1493 mm |
| Wheelbase: | 2835 mm | 2835 mm |
| Front track: | 1588 mm | 1588 mm |
| Rear (Back) track: | 1585 mm | 1585 mm |
| Minimum volume of Luggage (trunk): | 480 l | 480 l |
| Max weight: | 2090 kg | 2270 kg |
| Kerb Weight: | 1531 kg | 1710 kg |
| ABS: | yes | yes |
| Steering type: | Steering rack and pinion | Steering rack and pinion |
| Minimum turning circle (turning diameter): | 11.7 m | 11.7 m |