Car technical specifications and fuel economy / consumption / mpg

Comparison Volvo S80 II (facelift 2009) 2.4 D5 (205 Hp) Automatic & Hummer H1 I 5.7 V8 (193 Hp) 4x4 Automatic


Add car
Volvo S80 II (facelift 2009) 2.4 D5 (205 Hp) Automatic
Remove car
Hummer H1 I 5.7 V8 (193 Hp) 4x4 Automatic
Remove car
Brand: Volvo Hummer
Model: S80 H1
Generation: S80 II (facelift 2009) H1 I
Engine / modification: 2.4 D5 (205 Hp) Automatic 5.7 V8 (193 Hp) 4x4 Automatic
Production start: 2009 year 1995 year
Production end: 2011 year 1997 year
Coupe type: Sedan Off-road vehicle
Num. of Doors: 4 4
Num. of seats: 5 4
Fuel consumption / economy - urban: 9.0 l/100 km
Fuel consumption / economy - extra urban: 5.0 l/100 km
Fuel consumption / economy - combined: 6.7 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Drag coefficient: 0.7
Fuel tank volume: 70 l 95+65 l
Emission standard: Euro 5
CO2 emissions: 178 g/km
Power: 205 hp 193 hp
Max power in: 4000 rpm. 4000 rpm.
Maximum speed: 134 km/h
Acceleration from 0 to 100 km/h: 8.5 sec
Torque: 420 Nm @ 1500-3250 rpm. 450 Nm @ 2400 rpm.
Model Engine: D5244T10
Engine position: Front, transverse Front, longitudinal
Engine displacement: 2400 cm3 5733 cm3
Engine oil capacity: 6.0 l
Coolant: 12.6 l
Fuel System: Diesel - Standard diesel injection (SDI) Multi-point injection
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler)
Position of cylinders: Inline V engine
Number of cylinders: 5 8
Number of valves per cylinder: 2
Piston Stroke: 81 mm 88.39 mm
Cylinder Bore: 101.6 mm
Wheel Drive: Front wheel drive All wheel drive (4x4)
Number of Gears (automatic transmission): 6 4
Length: 4851 mm 4686 mm
Width: 1861 mm 2197 mm
Height: 1493 mm 1905 mm
Wheelbase: 2835 mm 3302 mm
Front track: 1588 mm 1819 mm
Rear (Back) track: 1585 mm 1819 mm
Ride height(clearance): 406 mm
Approach angle: 72 °
Departure angle: 37.5 °
Ramp angle: 29 °
Minimum volume of Luggage (trunk): 480 l
Max weight: 2200 kg
Front brakes: Ventilated discs
Rear brakes: Ventilated discs
Kerb Weight: 1647 kg 3140 kg
ABS: yes
Steering type: Steering rack and pinion
Minimum turning circle (turning diameter): 11.7 m 16.2 m