Car technical specifications and fuel economy / consumption / mpg

Comparison Volvo S60 II (facelift 2013) 1.6 T4F (180 Hp) Ethanol & Peugeot 301 1.6 VTi (115 Hp)


Add car
Volvo S60 II (facelift 2013) 1.6 T4F (180 Hp) Ethanol
Remove car
Peugeot 301 1.6 VTi (115 Hp)
Remove car
Brand: Volvo Peugeot
Model: S60 301
Generation: S60 II (facelift 2013) 301
Engine / modification: 1.6 T4F (180 Hp) Ethanol 1.6 VTi (115 Hp)
Production start: 2013 year 2012 year
Production end: 2017 year
Coupe type: Sedan Sedan
Num. of Doors: 4 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 8.8 l/100 km
Fuel consumption / economy - extra urban: 5.3 l/100 km
Fuel consumption / economy - combined: 6.8/9.3 l/100 km 6.5 l/100 km
Fuel Type: Petrol / Ethanol Petrol (Gasoline)
Fuel tank volume: 67.5 l 50 l
Emission standard: Euro 5
CO2 emissions: 157/152 g/km
Power: 180 hp 115 hp
Max power in: 5700 rpm. 6050 rpm.
Maximum speed: 225 km/h 188 km/h
Acceleration from 0 to 100 km/h: 8.3 sec 10.3 sec
Torque: 240 Nm/1620-4980 rpm. 150 Nm @ 4000 rpm.
Model Engine: B4164T2
Engine position: Front, transverse Front, transverse
Engine displacement: 1596 cm3 1587 cm3
Fuel System: Direct injection Multi-point injection
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Valvetrain: DOHC
Number of cylinders: 4 4
Number of valves per cylinder: 4 4
Compression ratio: 10
Piston Stroke: 81.4 mm
Cylinder Bore: 79 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (manual transmission): 6 5
Length: 4635 mm 4442 mm
Width: 1899 mm 1748 mm
Height: 1484 mm 1466 mm
Wheelbase: 2776 mm 2652 mm
Front track: 1588-1578 mm
Rear (Back) track: 1585-1575 mm
Ride height(clearance): 136 mm
Minimum volume of Luggage (trunk): 506 l
Maximum amount of Luggage (trunk): 1332 l
Front suspension: Independent, Spring McPherson, with stabilizer
Rear suspension: Independent, spring
Max weight: 1524 kg
Front brakes: Ventilated discs
Rear brakes: Disc
Kerb Weight: 1090 kg
ABS: yes yes
Steering type: Steering rack and pinion Steering rack and pinion
Minimum turning circle (turning diameter): 11.5 m