Car technical specifications and fuel economy / consumption / mpg

Comparison Volvo S40 II (facelift 2007) 2.0 D3 (150 Hp) & Volvo S40 II (facelift 2008) 2.5i AWD MT (220 Hp)


Add car
Volvo S40 II (facelift 2007) 2.0 D3 (150 Hp)
Remove car
Volvo S40 II (facelift 2008) 2.5i AWD MT (220 Hp)
Remove car
Brand: Volvo Volvo
Model: S40 S40
Generation: S40 II (facelift 2007) S40 II (facelift 2008)
Engine / modification: 2.0 D3 (150 Hp) 2.5i AWD MT (220 Hp)
Production start: 2011 year 2008 year
Production end: 2012 year 2010 year
Coupe type: Sedan Sedan
Num. of Doors: 4 4
Num. of seats: 5 5
Fuel consumption / economy - urban: 7.0 l/100 km 12.5 l/100 km
Fuel consumption / economy - extra urban: 4.0 l/100 km 6.4 l/100 km
Fuel consumption / economy - combined: 5.1 l/100 km 8.7 l/100 km
Fuel Type: Diesel Petrol (Gasoline)
Fuel tank volume: 60 l 62 l
Emission standard: Euro 5 EURO IV
CO2 emissions: 134 g/km
Power: 150 hp 220 hp
Max power in: 3500 rpm. 5000 rpm.
Maximum speed: 240 km/h
Acceleration from 0 to 100 km/h: 9.5 sec 6.8 sec
Torque: 350 Nm @ 1500-2750 rpm. 320 Nm/1500-4800 rpm.
Model Engine: D5204T5 B5254T3
Engine position: Front, transverse Front, transverse
Engine displacement: 1984 cm3 2521 cm3
Engine oil capacity: 5.9 l
Coolant: 8.5 l
Fuel System: Diesel Commonrail Multi-point injection
Aspiration / Turbine: Turbo / Intercooler (Turbocharging / Intercooler) Turbocharging
Position of cylinders: Inline Inline
Valvetrain: -
Number of cylinders: 5 5
Number of valves per cylinder: 4
Compression ratio: 9
Piston Stroke: 81 mm 93.2 mm
Cylinder Bore: 83 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (automatic transmission): 6
Number of Gears (manual transmission): 6 5
Length: 4476 mm 4468 mm
Width: 1770 mm 1770 mm
Height: 1454 mm 1452 mm
Wheelbase: 2640 mm 2640 mm
Front track: 1548 mm 1531 mm
Rear (Back) track: 1544 mm 1535 mm
Minimum volume of Luggage (trunk): 404 l 404 l
Maximum amount of Luggage (trunk): 883 l
Max weight: 2020 kg 1960 kg
Kerb Weight: 1498 kg 1368 kg
ABS: yes yes
Steering type: Steering rack and pinion
Minimum turning circle (turning diameter): 11.1 m 10.6 m