Comparison Volvo S40 II 1.8 i (125 Hp) & Saab 99 2.0 EMS (110 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Volvo | Saab |
| Model: | S40 | 99 |
| Generation: | S40 II | 99 |
| Engine / modification: | 1.8 i (125 Hp) | 2.0 EMS (110 Hp) |
| Production start: | 2007 year | 1972 year |
| Production end: | 2009 year | 1974 year |
| Coupe type: | Sedan | Sedan |
| Num. of Doors: | 4 | 4 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - urban: | 9.8 l/100 km | |
| Fuel consumption / economy - extra urban: | 5.7 l/100 km | |
| Fuel consumption / economy - combined: | 7.2 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 55 l | 45 l |
| Emission standard: | Euro 4 | |
| CO2 emissions: | 172 g/km | |
| Power: | 125 hp | 110 hp |
| Max power in: | 6000 rpm. | 5500 rpm. |
| Maximum speed: | 200 km/h | 170 km/h |
| Acceleration from 0 to 100 km/h: | 10.9 sec | 12 sec |
| Torque: | 165 Nm @ 4000 rpm. | 167 Nm @ 3700 rpm. |
| Model Engine: | B4184S11 | B20 |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1798 cm3 | 1985 cm3 |
| Engine oil capacity: | 4.3 l | 3.5 l |
| Coolant: | 7.5 l | 9.5 l |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | DOHC | DOHC |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 10.8 | 9.2 |
| Piston Stroke: | 83.1 mm | 78 mm |
| Cylinder Bore: | 83 mm | 90 mm |
| Wheel Drive: | Front wheel drive | Front wheel drive |
| Number of Gears (manual transmission): | 5 | 4 |
| Length: | 4468 mm | 4420 mm |
| Width: | 1770 mm | 1690 mm |
| Height: | 1452 mm | 1435 mm |
| Wheelbase: | 2640 mm | 2477 mm |
| Front track: | 1531 mm | 1403 mm |
| Rear (Back) track: | 1535 mm | 1430 mm |
| Minimum volume of Luggage (trunk): | 404 l | |
| Maximum amount of Luggage (trunk): | 883 l | |
| Front brakes: | Disc | |
| Rear brakes: | Disc | |
| Kerb Weight: | 1280 kg | 1161 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.6 m |