Comparison Volkswagen Phaeton (facelift 2010) 3.6 V6 (280 Hp) 4MOTION & Opel Kadett E Combo 1.3 N (60 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Volkswagen | Opel |
| Model: | Phaeton | Kadett |
| Generation: | Phaeton (facelift 2010) | Kadett E Combo |
| Engine / modification: | 3.6 V6 (280 Hp) 4MOTION | 1.3 N (60 Hp) |
| Production start: | 2010 year | 1986 year |
| Production end: | 2015 year | 1989 year |
| Coupe type: | Sedan | Combi |
| Num. of Doors: | 4 | 3 |
| Num. of seats: | 4-5 | 2 |
| Fuel consumption / economy - urban: | 16.5 l/100 km | |
| Fuel consumption / economy - extra urban: | 8.4 l/100 km | |
| Fuel consumption / economy - combined: | 11.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 90 l | |
| Emission standard: | Euro 5 | |
| Power: | 280 hp | 60 hp |
| Max power in: | 6250 rpm. | |
| Maximum speed: | 250 km/h | |
| Acceleration from 0 to 100 km/h: | 8.6 sec | |
| Torque: | 370 Nm @ 3500 rpm. | 94 Nm/3400-3800 rpm. |
| Model Engine: | CHNA, CMVA | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 3597 cm3 | 1297 cm3 |
| Engine oil capacity: | 6.2 l | |
| Fuel System: | Multi-point injection | Carburettor |
| Position of cylinders: | V engine | Inline |
| Valvetrain: | SOHC | |
| Number of cylinders: | 6 | 4 |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 8.2 | |
| Piston Stroke: | 73.4 mm | |
| Cylinder Bore: | 75 mm | |
| Wheel Drive: | All wheel drive (4x4) | |
| Number of Gears (automatic transmission): | 6 | |
| Number of Gears (manual transmission): | 5 | |
| Length: | 5059 mm | |
| Width: | 1903 mm | |
| Height: | 1450 mm | |
| Wheelbase: | 2881 mm | |
| Front track: | 1630 mm | |
| Rear (Back) track: | 1617 mm | |
| Minimum volume of Luggage (trunk): | 500 l | |
| Max weight: | 2710 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Disc | |
| Kerb Weight: | 2154-2248 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Power steering: | Electric Steering | |
| Minimum turning circle (turning diameter): | 12 m |