Comparison Volkswagen Lamando 230TSI (131 Hp) DSG & Opel Kadett C Coupe 1.2 (55 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Volkswagen | Opel |
| Model: | Lamando | Kadett |
| Generation: | Lamando | Kadett C Coupe |
| Engine / modification: | 230TSI (131 Hp) DSG | 1.2 (55 Hp) |
| Production start: | 2014 year | 1973 year |
| Production end: | 1979 year | |
| Coupe type: | Sedan | Coupe |
| Num. of Doors: | 4 | 2 |
| Num. of seats: | 5 | 5 |
| Fuel consumption / economy - combined: | 5.4 l/100 km | |
| Fuel Type: | Petrol (Gasoline) | Petrol (Gasoline) |
| Fuel tank volume: | 50 l | 43 l |
| Emission standard: | Euro 5 | |
| Power: | 131 hp | 55 hp |
| Max power in: | 5000 rpm. | 5400 rpm. |
| Maximum speed: | 206 km/h | 142 km/h |
| Acceleration from 0 to 100 km/h: | 9.1 sec | 19 sec |
| Torque: | 225 Nm @ 1400-3500 rpm. | 84 Nm @ 3400 rpm. |
| Model Engine: | EA211 | |
| Engine position: | Front, transverse | Front, transverse |
| Engine displacement: | 1395 cm3 | 1196 cm3 |
| Fuel System: | Direct injection | Carburettor |
| Aspiration / Turbine: | Turbocharger | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHV | |
| Number of cylinders: | 4 | 4 |
| Number of valves per cylinder: | 4 | 2 |
| Compression ratio: | 7.8 | |
| Piston Stroke: | 61 mm | |
| Cylinder Bore: | 79 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 7 DSG | |
| Number of Gears (manual transmission): | 4 | |
| Length: | 4598 mm | 4127 mm |
| Width: | 1826 mm | 1580 mm |
| Height: | 1425 mm | 1340 mm |
| Wheelbase: | 2656 mm | 2395 mm |
| Front track: | 1300 mm | |
| Rear (Back) track: | 1301 mm | |
| Minimum volume of Luggage (trunk): | 480 l | |
| Maximum amount of Luggage (trunk): | 1150 l | |
| Front suspension: | Independent type McPherson | |
| Rear suspension: | Multi-link independent | |
| Max weight: | 1170 kg | |
| Front brakes: | Ventilated discs | Disc |
| Rear brakes: | Disc | Drum |
| Kerb Weight: | 1325 kg | 805 kg |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 9.2 m | |
| Tire size: | 205/50 R16 | |
| Wheel rims size: | R16 |