Car technical specifications and fuel economy / consumption / mpg

Comparison Volkswagen Golf VI Variant 1.4 (160 Hp) TSI & Volkswagen Passat (B3, B4) 1.8 (75 Hp)


Add car
Volkswagen Golf VI Variant 1.4 (160 Hp) TSI
Remove car
Volkswagen Passat (B3, B4) 1.8 (75 Hp)
Remove car
Brand: Volkswagen Volkswagen
Model: Golf Passat
Generation: Golf VI Variant Passat (B3, B4)
Engine / modification: 1.4 (160 Hp) TSI 1.8 (75 Hp)
Production start: 2009 year 1990 year
Production end: 2013 year 1996 year
Coupe type: Combi
Num. of Doors: 5
Num. of seats: 5
Fuel consumption / economy - urban: 8.4 l/100 km 9.2 l/100 km
Fuel consumption / economy - extra urban: 5.3 l/100 km 6.8 l/100 km
Fuel consumption / economy - combined: 6.4 l/100 km 7.6 l/100 km
Fuel Type: Petrol (Gasoline) Petrol (Gasoline)
Fuel tank volume: 55 l
Emission standard: Euro 5
Power: 160 hp 75 hp
Max power in: 5800 rpm. 5000 rpm.
Maximum speed: 220 km/h
Acceleration from 0 to 100 km/h: 8.4 sec
Torque: 140 Nm/2500 rpm.
Model Engine: CAVD, CTHD, CTKA
Engine position: Front, transverse Front, transverse
Engine displacement: 1390 cm3 1781 cm3
Engine oil capacity: 3.6 l
Fuel System: Direct injection Mono-point injection
Aspiration / Turbine: Turbocharging / Mechanical supercharging (Compressor)
Position of cylinders: Inline Inline
Valvetrain: OHC
Number of cylinders: 4 4
Number of valves per cylinder: 4 2
Compression ratio: 9
Piston Stroke: 86.4 mm
Cylinder Bore: 81 mm
Wheel Drive: Front wheel drive Front wheel drive
Number of Gears (manual transmission): 6
Length: 4534 mm
Width: 1781 mm
Height: 1504 mm
Wheelbase: 2578 mm
Front track: 1535 mm
Rear (Back) track: 1508 mm
Minimum volume of Luggage (trunk): 505 l
Maximum amount of Luggage (trunk): 1495 l
Front suspension: Independent, Spring McPherson, with stabilizer McPherson
Rear suspension: Independent, spring multi-link with stabilizer
Max weight: 1960 kg
Front brakes: Ventilated discs Disc
Rear brakes: Disc Drum
Kerb Weight: 1448 kg
ABS: yes
Steering type: Steering rack and pinion
Power steering: Electric Steering
Minimum turning circle (turning diameter): 10.9 m