Comparison Volkswagen Golf II (19E) 1.6 (72 Hp) & Toyota Land Cruiser 105 4.2 D (135 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Volkswagen | Toyota |
| Model: | Golf | Land Cruiser |
| Generation: | Golf II (19E) | Land Cruiser 105 |
| Engine / modification: | 1.6 (72 Hp) | 4.2 D (135 Hp) |
| Production start: | 1986 year | 1998 year |
| Production end: | 1991 year | 2005 year |
| Coupe type: | Hatchback | Off-road vehicle |
| Num. of Doors: | 3 | 5 |
| Num. of seats: | 5 | 8 |
| Fuel Type: | Petrol (Gasoline) | Diesel |
| Fuel tank volume: | 55 l | 95 l |
| Emission standard: | Euro 3 | |
| Power: | 72 hp | 135 hp |
| Max power in: | 5200 rpm. | 4000 rpm. |
| Maximum speed: | 162 km/h | |
| Acceleration from 0 to 100 km/h: | 14.1 sec | |
| Torque: | 128 Nm @ 2800 rpm. | 280 Nm @ 2200 rpm. |
| Model Engine: | EZ, EW | |
| Engine position: | Front, transverse | Front, longitudinal |
| Engine displacement: | 1595 cm3 | 4163 cm3 |
| Engine oil capacity: | 3-3.5 l | |
| Coolant: | 6.3-6.5 l | |
| Fuel System: | Carburettor | Diesel Commonrail |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | Inline |
| Valvetrain: | OHC | - |
| Number of cylinders: | 4 | 6 |
| Number of valves per cylinder: | 2 | 2 |
| Compression ratio: | 9.3 | 22.7 |
| Piston Stroke: | 86.9 mm | 100 mm |
| Cylinder Bore: | 76.5 mm | 94 mm |
| Wheel Drive: | Front wheel drive | Part time 4x4 |
| Number of Gears (automatic transmission): | 5 | |
| Number of Gears (manual transmission): | 5 | 5 |
| Length: | 3985 mm | 4890 mm |
| Width: | 1665 mm | 1940 mm |
| Height: | 1415 mm | 1890 mm |
| Wheelbase: | 2475 mm | 2850 mm |
| Front track: | 1620 mm | |
| Rear (Back) track: | 1615 mm | |
| Minimum volume of Luggage (trunk): | 345 l | |
| Maximum amount of Luggage (trunk): | 1145 l | |
| Front suspension: | Independent type McPherson | |
| Max weight: | 1400 kg | |
| Front brakes: | Disc | Ventilated discs |
| Rear brakes: | Drum | Ventilated discs |
| Kerb Weight: | 880 kg | |
| ABS: | yes | |
| Minimum turning circle (turning diameter): | 11 m |