Car technical specifications and fuel economy / consumption / mpg

Comparison VAZ 21041 1.6 (74 Hp) & Volvo V60 (2013 facelift) 2.0 T5 (245 Hp) Automatic


Add car
VAZ 21041 1.6 (74 Hp)
Remove car
Volvo V60 (2013 facelift) 2.0 T5 (245 Hp) Automatic
Remove car
Brand: VAZ Volvo
Model: 2104 V60
Generation: 21041 V60 (2013 facelift)
Engine / modification: 1.6 (74 Hp) 2.0 T5 (245 Hp) Automatic
Production start: 2000 year 2014 year
Coupe type: Combi Combi
Num. of Doors: 5 5
Num. of seats: 5 5
Fuel consumption / economy - urban: 9.5 l/100 km
Fuel consumption / economy - extra urban: 6.9 l/100 km
Fuel consumption / economy - combined: 9.2 l/100 km 6.2 l/100 km
Fuel Type: Petrol (Gasoline) Petrol (Gasoline)
Fuel tank volume: 42 l 67.5 l
CO2 emissions: 144 g/km
Power: 74 hp 245 hp
Max power in: 5600 rpm. 5500 rpm.
Maximum speed: 145 km/h 230 km/h
Acceleration from 0 to 100 km/h: 17 sec 6.4 sec
Torque: 103 Nm/3400 rpm. 350 Nm/1500-4800 rpm.
Model Engine: B4204T11
Engine position: Front, longitudinal Front, transverse
Engine displacement: 1569 cm3 1969 cm3
Fuel System: Carburettor Direct injection
Aspiration / Turbine: Turbocharging
Position of cylinders: Inline Inline
Valvetrain: DOHC
Number of cylinders: 4 4
Number of valves per cylinder: 2 4
Compression ratio: 10.8
Piston Stroke: 93.2 mm
Cylinder Bore: 82 mm
Wheel Drive: Rear wheel drive Front wheel drive
Number of Gears (automatic transmission): - 8
Number of Gears (manual transmission): 5
Length: 4115 mm 4635 mm
Width: 1620 mm 1899 mm
Height: 1443 mm 1484 mm
Wheelbase: 2424 mm 2776 mm
Front track: 1365 mm 1588 - 1578 mm
Rear (Back) track: 1321 mm 1585 - 1575 mm
Ride height(clearance): 136 mm
Minimum volume of Luggage (trunk): 375 l 430 l
Maximum amount of Luggage (trunk): 1340 l
Front suspension: Double wishbone Independent, Spring McPherson, with stabilizer
Rear suspension: One-piece beam bridge Independent, spring
Max weight: 1475 kg
Front brakes: Disc Ventilated discs
Rear brakes: Drum Disc
Kerb Weight: 1020 kg
ABS: yes
Steering type: Worm-reduction unit Steering rack and pinion
Minimum turning circle (turning diameter): 11.5 - 12.4 m