Comparison Toyota Verso-S II 1.4 D-4D DPF (89 Hp) M/M & Toyota Celica (T16) 1.6 GT 16V (124 Hp)
Add car |
Remove car |
Remove car |
| Brand: | Toyota | Toyota |
| Model: | Verso-S | Celica |
| Generation: | Verso-S II | Celica (T16) |
| Engine / modification: | 1.4 D-4D DPF (89 Hp) M/M | 1.6 GT 16V (124 Hp) |
| Production start: | 2010 year | 1986 year |
| Production end: | 2015 year | 1989 year |
| Coupe type: | MPV | Coupe |
| Num. of Doors: | 5 | 2 |
| Num. of seats: | 5 | |
| Fuel consumption / economy - urban: | 5.0 l/100 km | |
| Fuel consumption / economy - extra urban: | 4.0 l/100 km | |
| Fuel consumption / economy - combined: | 4.4 l/100 km | |
| Fuel Type: | Diesel | Petrol (Gasoline) |
| Emission standard: | Euro 5 | |
| Power: | 89 hp | 124 hp |
| Max power in: | 3800 rpm. | |
| Maximum speed: | 175 km/h | |
| Acceleration from 0 to 100 km/h: | 13.0 sec | |
| Torque: | 205 Nm @ 1800-2800 rpm. | |
| Model Engine: | 1ND-TV | 4A-GE |
| Engine position: | Front, transverse | |
| Engine displacement: | 1364 cm3 | |
| Engine oil capacity: | 3.3 l | |
| Coolant: | 6 l | |
| Fuel System: | Diesel Commonrail | |
| Aspiration / Turbine: | Turbocharging | |
| Position of cylinders: | Inline | |
| Valvetrain: | DOHC | |
| Number of cylinders: | 4 | |
| Number of valves per cylinder: | 2 | |
| Compression ratio: | 16.5 | |
| Piston Stroke: | 81.5 mm | |
| Cylinder Bore: | 73 mm | |
| Wheel Drive: | Front wheel drive | |
| Number of Gears (automatic transmission): | 6 | |
| Length: | 3990 mm | |
| Width: | 1695 mm | |
| Height: | 1595 mm | |
| Wheelbase: | 2550 mm | |
| Front track: | 1470 mm | |
| Rear (Back) track: | 1460 mm | |
| Minimum volume of Luggage (trunk): | 430 l | |
| Maximum amount of Luggage (trunk): | 623 l | |
| Front suspension: | Independent, Spring McPherson, with stabilizer | |
| Rear suspension: | Torsion | |
| Max weight: | 1605 kg | |
| Front brakes: | Ventilated discs | |
| Rear brakes: | Drum | |
| Kerb Weight: | 1140 kg | |
| ABS: | yes | |
| Steering type: | Steering rack and pinion | |
| Minimum turning circle (turning diameter): | 10.8 m |